[Coco] Unreliable Coco3

David Roper ebonhand09 at gmail.com
Mon Oct 22 09:19:26 EDT 2012


Games etc, Drivewire cart etc work 90% of the time

On 23 October 2012 00:10, Brian Blake <random.rodder at gmail.com> wrote:
>
> Hey David,
>
> The problems with mine started out being intermittent. Then it got to a
> point where and attempt at drive access would trigger the drive LED and that
> was it; shortly thereafter was nothing - this all happened very quickly. If
> you go to the Maltedmedia archives around January of 2010, you'll see two
> threads:
>
> *Re: [Coco] Weird CoCo3 problem*
> *
> *
> *and*
> *
> *
> *Re: [Coco] Weird CoCo3 problem -- AAAARRRGGGGGHHHHH!!!!*
>
> See if you can do any of the recommended troubleshooting suggested there.
> One way to check the cartridge port - do you have any games or an Orchestra
> 90 you could use?
>
> On 10/22/2012 8:49 AM, David Roper wrote:
>>
>> Hi Brian,
>>
>> The main difference between what you've reported and what's going on
>> for me is that the drive is responding and doing *some* things, but
>> it's as if a signal isn't getting from the drive back to the Coco
>>
>> Instinct keeps telling me it's the cartridge port
>>
>> I just wish I had more hardware skills so I could diagnose it and fix it!
>>
>> - David
>>
>> On 22 October 2012 22:28, Brian Blake <random.rodder at gmail.com> wrote:
>>>
>>> David,
>>>
>>> Check out this post on my blog from a few years ago:
>>> http://tandycoco.com/blog/archives/42
>>>
>>> While mine didn't weird display issues like yours, the floppy drive
>>> access
>>> problems certainly sound familiar...
>>>
>>>
>>>
>>> On 10/22/2012 6:36 AM, David Roper wrote:
>>>>
>>>> So, I got myself a new controller and drive combo (thanks, Nick!)
>>>>
>>>> .. turns out that the main problem is actually my 512k Coco3 - the new
>>>> drive is showing precisely the same behaviour as the old one.
>>>>
>>>> I've tried the same setup with my Coco2, and everything runs smooth and
>>>> perfect
>>>>
>>>> I suspect something is wrong with my Coco3's cartridge port, and would
>>>> appreciate any ideas
>>>>
>>>> Symptoms:
>>>> When loading a cartridge (either through modified multipak or 'naked
>>>> in the port'), at least some of the time (1 or two times out of four)
>>>> the screen will be filled with garbage (green background, yellow
>>>> blocks) or, the entire display will be shifted a half-character to the
>>>> left
>>>>
>>>> If it does load properly -
>>>> 'DIR' with an unformated disk in the drive causes 5 'grinds' and an
>>>> ?IO error (drive motor stops)
>>>> 'DIR' with a formatted disk in the drive causes at most 1 'grind', and
>>>> then the drive motor spins endlessly
>>>> 'DSKINI0' causes at most 1 'grind', and then the drive motor spins
>>>> endlessly
>>>>
>>>> The above is precisely the same symptoms as my old controller/drive,
>>>> and is 100% reproducible. Once again, the drive and controller work
>>>> flawlessly on my Coco2
>>>>
>>>> Any ideas, suggestions, diagnostics? (or replacement Coco3s in
>>>> Australia?)
>>>>
>>>> Kind regards,
>>>> David
>>>>
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> http://five.pairlist.net/mailman/listinfo/coco
>>>
>>>
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> http://five.pairlist.net/mailman/listinfo/coco
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco



More information about the Coco mailing list