[Coco] source of +5v on coco to drive HxC floppy emulator?

[Bill Pierce]

I have a AT keyboard interface in my Coco and it pulls the 5v off the end of the last resister (top right looking down on the MB) on the board. There's a couple of AT KB interface manuals on MaltedMedia and they have diagrams as to where to get the 5v


Music from the Tandy/Radio Shack Color Computer 2 & 3 
https://sites.google.com/site/dabarnstudio/
Bill Pierce
ooogalapasooo at aol.com




-----Original Message-----
From: Brian Sturk <bsturk at comcast.net>
To: coco <coco at maltedmedia.com>
Sent: Wed, May 30, 2012 4:27 pm
Subject: [Coco] source of +5v on coco to drive HxC floppy emulator?


Hi everyone,
I've done some searching on the web and it seems the only port(s) on my Coco3
hat can supply +5V are the joystick ports.  I need +5V and approximately .5
mps of current to drive the HxC floppy emulator which I plan on using with my
oco.  That seems like a lot of current for a joystick, but I haven't been
ble to find out if that is suitable or not.
Any tips would be greatly appreciated.
~brian
-- 
------------------------------------------------,------.
 Brian Sturk - http://home.comcast.net/~bsturk / C/C++ | .>   )\,^a__
-------------------------. bsturk%comcast.net | Python |(  _ _)/ /-."~
 http://www.telengard.com `--------------------`-------| `( )_ )/
 Telengard Technologies Inc - Win32/UNIX programming   |_<_s_<_s
-------------------------------------------------------'
--
oco mailing list
oco at maltedmedia.com
ttp://five.pairlist.net/mailman/listinfo/coco