[Coco] DW4 with CoCo 2

Bruce W. Calkins brucewcalkins at charter.net
Mon Mar 12 22:04:10 EDT 2012


To shift primary drive access you need the command DRIVE # on the CoCo otherwise the default is drive 0.  Also many disk programs were coded for drive 0 and will not run while mounted in another drive.

Bruce W.

 
  ----- Original Message ----- 
  From: Mike Rowen 


  I'm having an odd issue with DW4 and a CoCo 2. Just wondering what I'm
  doing wrong.

  The CoCo 2 comes up with DECB 1.1 (FD-501 in the cart slot).
  I'm loading hdbdos for the CC2 via cassette and audio file from the PC.
  HDB-DOS 1.2 DW3 COCO 2 appears on the CoCo screen after EXEC.
  I mount fahrfall.dsk in drive 0 via the GUI and directory works great from
  the CoCo2.
  I unmount that disk and move it to DW4 drive 1 and issue DIR 1 from the
  CoCo2.
  I then get I/O error from the CoCo 2. The server tab on the DW4 GUI has the
  following error:


  Mon Mar 12 2012 21:50:08.425  WARN   DWProtocolHandler
  dwproto-0-11        DoOP_READEX: No disk in drive 0

  So DW4 is acting like its still looking in drive 0 instead of 1.
  Stranger still, I mount a another disk in drive 0. I can then get a DIR of
  drive 0 ok. If I do a DIR 1, instead of an I/O error,
  I now get a blank line followed by DRIVE=1    FREE=0, but no directory
  information.

  The configuration within DW4 looks correct for a CoCo2, what am I missing
  here? Any help appreciated.

  Cheers,
  -Mike Rowen

  --
  Coco mailing list
  Coco at maltedmedia.com
  http://five.pairlist.net/mailman/listinfo/coco


More information about the Coco mailing list