[Coco] Disk drive question

Bill Pierce ooogalapasooo at aol.com
Wed Jan 18 16:32:09 EST 2012


I've tried the drives in different combos. individually as well. For the most part I can't even boot from a single drive except for a Level 1 v2,00 system master boot. Seems I read somewhere long ago that the RS factory disks were written to in a manner that even if your drive was in slight miss-alignment that in most cases the disk would read. This was for the fact that no 2 drives are exact in alignment and they wanted no problems. Since the RS disk will boot and no "created" disk will boot, it makes me wonder about alignment.


Music from the Tandy/Radio Shack Color Computer 2 & 3 
https://sites.google.com/site/dabarnstudio/
Bill Pierce
ooogalapasooo at aol.com




-----Original Message-----
From: Wayne Campbell <asa.rand at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Wed, Jan 18, 2012 1:48 pm
Subject: Re: [Coco] Disk drive question


> On another note, are there any special jumper settings needed to use a 
 Coco 5.25 drive on a PC? The 3 drives I have are a 5.25 40trk DS (D0), 
 5.25 80trk DS (D2) and 3.5 80trk DS (D1). I do have a couple of old 3.5" 
 1.4meg drives that came with PCs. The drive is set for drive 0 on the 
 Coco.
This may be your problem. As I recall, a 80-track disk only allows you to 
se 3 drive descriptors. When I had my CoCo3 I had 2 40-trk 5.25s and 1 
0-trk 3.5. I'm not certain, but trying to use 2 80-trk drives may be what 
s causing your problem. Someone who knows more than I can say for sure.
Wayne

-
oco mailing list
oco at maltedmedia.com
ttp://five.pairlist.net/mailman/listinfo/coco




More information about the Coco mailing list