[Coco] Floppy weirdness

[David Roper]

Hi Mike,

I've got an FD-500 controller and FD-500 dual disk drive

I'll give the contacts a good clean and see if that changes anything

- Dave

On 16 April 2012 20:15, Mike Rowen <mike at bcmr3.net> wrote:
> David,
>
> Which controller are you using? Your first step will be to make sure the contacts are clean on the controller. When I've run into goofy disk behavior, it has almost always been issues with contacts on the cartridge port. I have an FD-501 that is particularly iffy.
>
> -Mike
>
> On Apr 16, 2012, at 5:16 AM, David Roper <ebonhand09 at gmail.com> wrote:
>
>> Hi All,
>>
>> I've finally found space to hook my coco stuff back up
>>
>> I'm trying to format some disks using DSKINI, however I think
>> something is going haywire somewhere
>>
>> After issuing the command DSKINI 0 (or 1, same results either way) I
>> get the first drive access/seek/grind tone, and then nothing audible
>> except for the sound of the disk spinning. I've left it for a good 10
>> minutes and nothing appears to be happening
>>
>> If I use DIR on any of my disks, I get the usual group of 3 or 4
>> access/seek/grind tones, but DSKINI only throws the one, and then
>> hangs
>>
>> Any ideas on how I can further diagnose what's wrong, so I can get up
>> and running again?
>>
>> - David
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco