[Coco] System gen problem - SOLVED!!

[Aaron Wolfe]

On Sun, Feb 14, 2010 at 6:49 AM, Robert Gault <robert.gault at att.net> wrote:
> Aaron Wolfe wrote:
>
>>
>> The different CRC is likely due to the non standard assembler I use.
>> It's comprised of several trained cats and a large lever.
>> I will look into that. Glad things work for now.
>>
>>
>>> rbdw3.dr from current cvs    Aaron's
>>> size $01CB                   size $01CB
>>> CRC  $7C3778                 CRC  $D4D951
>>> edition 4                    edition 4
>>>
>>> dw3.sb from current cvs      Aaron's
>>> size $0325                   size $0325
>>> CRC  $166DC0                 CRC $85C1CC
>>> edition $21                  edition $21
>>>
>>>
>
> Since the sizes are the same, there is a good chance it is something like a
> different number of bits in an indexed addressing mode.
>

Are you using the latest Toolshed?  There was a small change to mamou
not long again that could explain this.
-Aaron