[Coco] System gen problem - SOLVED!!

[Robert Gault]

Aaron Wolfe wrote:
> On Sat, Feb 13, 2010 at 7:22 AM, Robert Gault<robert.gault at att.net>  wrote:
>> Aaron Wolfe wrote:
>>   To use the latest
>>>
>>> drivers, you can build NitrOS-9 from CVS  ....
>>
>> Aaron,
>> I'm not sure that will work. The rbdw3 and dw3 on your disks have different
>> CRCs from those of the latest CVS build. I'll run some tests to see what
>> will happen trying to use a pure CVS build and a CVS build with your
>> drivers.
>>
>
> Ok, please let us know what you find.
>

Right! Here are the latest results.

Compile the current cvs for 6309L2 and make a boot disk with Drivewire drivers. 
Works perfectly.
Use Aaron's disks on Sourceforge for a 6309L2 system and make a boot disk with 
Drivewire drivers. Works perfectly.
Compare the CRCs for rbdw3.dr and dw3.sb obtained from these two procedures and 
they are not the same. Hmmm, well that does not matter on my system, might on 
others, but it does not seem right.

rbdw3.dr from current cvs    Aaron's
size $01CB                   size $01CB
CRC  $7C3778                 CRC  $D4D951
edition 4                    edition 4

dw3.sb from current cvs      Aaron's
size $0325                   size $0325
CRC  $166DC0                 CRC $85C1CC
edition $21                  edition $21