[Coco] OS9 Lvl 1 rev 2.00.00 - double sided floppy configuration

Chad Hendon chadbh74 at hotmail.com
Fri Aug 6 10:34:30 EDT 2010


Ok I'm unable to use the NitrOS9 COBBLER/OS9Gen to make a double sided boot disk.  When I boot the modded OS9 and use those, the resulting disk just clears screen to OK prompt.  I tried booting NitrOS9 and then OS9Gen using the modded OS9 as source but that disk hangs aver boot release info.  Interesting thing this time though....says "BOOTING NITROS9" then next screen says expected "OS9 Level 1" info before the freeze.  Looks like you are correct in the track 35 change, but I'm thinking it expects the source boot track to be in same place as destination.  Doesn't seem to be able to 'move' it from OS9 location to where NitrOS9 has it

Connected by MOTOBLUR™ on T-Mobile

-----Original message-----
From: Bob Devries <devries.bob at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Fri, Aug 6, 2010 09:31:22 GMT+00:00
Subject: Re: [Coco] OS9 Lvl 1 rev 2.00.00 - double sided floppy configuration

Thinking about this some more.....

Will Chad still require the BOOTFIX module, or should I send him OS9Gen and Cobbler from NitrOS9 as well?

Chad, the "fix" will be a multiple step process as I remember it....

"Convert" your present OS9Boot file to Double-sided working by replacing the CCDISK driver module and the descriptors D0 and D1 with their NitrOS9 equivalents. This will leave you with a disk which is still single sided, but when booted, will have double-sided working.

To get a bootable double sided system, you need to then format a double sided disk, and cobbler the boot file to it. Sadly, the original OS9 Level 1 Cobbler (and OS9Gen, too I think) were not coded for DS working, so they will try to put the boot track (usually on track 35) on the wrong track. You can fix this (I'm presuming here that NitrOS9 fixed this...) by replacing Cobbler and OS9Gen with modules from the NitrOs9 distribution.

If you like, I can add those to the disk image I already sent and resend.

Regards, Bob Devries
Dalby, QLD, Australia

----- Original Message ----- From: "Chad H" <chadbh74 at hotmail.com>
To: "'CoCoList for Color Computer Enthusiasts'" <coco at maltedmedia.com>
Sent: Friday, August 06, 2010 4:35 PM
Subject: [Coco] OS9 Lvl 1 rev 2.00.00 - double sided floppy configuration


> Ok, I'm revisiting this issue under the old OS-9 level 1 rev 2.00.00 > because
> NitrOS9, while it provides DS/DD 5.25" floppy access already, eats up too
> much memory even after I removed as many modules as I could get away with
> and still have it boot  (unless I can find a good NitrOS9 disk 2 'modules'
> that I can somehow use to strip it down even further).
>
>
>
> Right now, I can get 141 pages free using MFREE at NitrOS9 bootup.  OS9 is
> getting 162 pages.  I need the extra memory.  Anyone know a way to
> re-configure or replace the floppy driver in OS-9 level 1 rev 2.0.00 to > get
> it to Double-sided 40-track?  (Just like it is in NitrOS9)
>
>
>
> Thanks
>
>
>
> -          Chad
>
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco 

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco


More information about the Coco mailing list