[Coco] NitrOS9 driver for Tandy RS232 Pak?

[Steven Hirsch]

On Sun, 28 Dec 2008, L. Curtis Boyle wrote:

> The standard driver is ACIAPAK, but if Bruce Isted's SACIA is still part of 
> the NitrOS9 distribution, use it instead (much more advanced, larger buffers, 
> and can run at higher speeds). You will have to make sure that you're 
> descriptor is pointing to the right driver. You can reliably run 9600 baud 
> this way, and even 19.2k if you are downloading files using a non-steaming 
> protocol (like YModem/XModem, bit not ZModem) and are running a 6309 chip 
> with the appropriate version of Nitros.

Thanks for all the responses.  Each of them assumes knowledge not in 
evidence on my part, but there are enough overlapping bits that I should 
be able to hack through it :-).

In particular, there is a fragment of documentation in the NitrOS9 docs 
subdirectory that mentions "ACIA51" and has some verbiage on the subject. 
However, it's not included in anything other than the L1 manual so I'm 
uncertain as to whether it applies to L2.

None of the subject drivers appear to be supplied in the NitrOS9 source 
distribution.

Steve


--