[Coco] [Color Computer] [coco] SCSI trouble

[George's Coco Address]

----- Original Message ----- 
From: "George's Coco Address"

>I use a Ken-Ton SCSI interface on one of my coco3 machines under OS9 L2. In
> a recent attempt to backup the hard drive (ST138N) to another, external
> ST138N, I discovered that I could not access the external drive and the
> internal drive is being accessed as both /h0 and /h1.
> This system used to work, but it was a long time ago since I did a backup.
>
> Any suggestions as to what may cause this problem?
>
> George

 Just now, using dmode, I changed drv to $02 and $03 on the /dd /h0 and /h1 
device descriptors and the /h0 drive was always present. I'm guessing at 
this point that there may be a problem with the drive itself.  Later, I'll 
replace that drive with the other one and see if the problem persists.
 This CC3 is a repack in a PC case. The /h0 drive is in that case. The /h1 
drive is in an external case.

George