[Coco] OT: Mounting CDROM images

[Benoit Bleau]

Gene, I found this with google:

Microsoft has a free, 60kb program that does the same thing! Of course, it
is not supported... and it's not as friendly as the software listed above;
however, it works and it's free.

Here's the download link:
winxpvirtualcdcontrolpanel<http://download.microsoft.com/download/7/b/6/7b6abd84-7841-4978-96f5-bd58df02efa2/winxpvirtualcdcontrolpanel_21.exe>

Here's the readme:
--------------------------------------------------------------------------------------------
Readme for Virtual CD-ROM Control Panel v2.0.1.1

THIS TOOL IS UNSUPPORT BY MICROSOFT PRODUCT SUPPORT SERVICES


System Requirements
===================
- Windows XP Home or Windows XP Professional

Installation instructions
=========================
1. Copy VCdRom.sys to your %systemroot%\system32\drivers folder.
2. Execute VCdControlTool.exe
3. Click "Driver control"
4. If the "Install Driver" button is available, click it. Navigate to the
%systemroot%\system32\drivers folder, select VCdRom.sys, and click Open.
5. Click "Start"
6. Click OK
7. Click "Add Drive" to add a drive to the drive list. Ensure that the drive
added is not a local drive. If it is, continue to click "Add Drive" until an
unused drive letter is available.
8. Select an unused drive letter from the drive list and click "Mount".
9. Navigate to the image file, select it, and click "OK". UNC naming
conventions should not be used, however mapped network drives should be OK.

You may now use the drive letter as if it were a local CD-ROM device. When
you are finished you may unmount, stop, and remove the driver from memory
using the driver control.


Good luck :)
--
Benoit