[Coco] [Color Computer] USB project

[James Diffendaffer]

Even if I have to invert the reset/interrupt lines and include the
clock I shouldn't need additional chips.  I could even add jumpers to
give the interface an alternate address.

--- In ColorComputer at yahoogroups.com, "James Diffendaffer"
<jdiffendaffer at y...> wrote:
> --- In ColorComputer at yahoogroups.com, "James Diffendaffer"
> <jdiffendaffer at y...> wrote:
> > The Cypress USB chip requires the following inputs:
> > D0-D7 for data I/O
> > A0 to select which address on the chip you will be accessing
> > /R read line active low
> > /W write line active low
> > /CS chip select active low
> 
> Oops... I also need to look at the interrupt interface and reset.  I
> still think I'll have enough gates even if I need to invert a line.





------------------------ Yahoo! Groups Sponsor --------------------~--> 
<font face=arial size=-1><a href="http://us.ard.yahoo.com/SIG=12hg5sjro/M=362131.6882499.7825260.1510227/D=groups/S=1705005378:TM/Y=YAHOO/EXP=1122740594/A=2889191/R=0/SIG=10r90krvo/*http://www.thebeehive.org
">Get Bzzzy! (real tools to help you find a job) Welcome to the Sweet Life - brought to you by One Economy</a>.</font>
--------------------------------------------------------------------~-> 

Brought to you by the 6809, the 6803 and their cousins! 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ColorComputer/

<*> To unsubscribe from this group, send an email to:
    ColorComputer-unsubscribe at yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/