[Coco] GIME questions

David Gacke dgacke at ektarion.com
Mon Aug 16 15:26:00 EDT 2004


One final question before I dig into this. Are GIME registers FF90 and
FFAx readable?

I'll try and verify their contents as well, if they are.



Dave


-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com]
On Behalf Of Robert Gault
Sent: Monday, August 16, 2004 1:27 PM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] GIME questions

David Gacke wrote:
> Hi Robert,
> 
> Here's the setup I've got. I've got a daughterboard I made jammed into
> the 6809 socket of my CoCo 3. Then I have a ribbon cable back to my
> dsPIC demo board with a 30F6014 on it.
> 
> Connected to that, I have a Microchip ICD2 pod for downloading new
code
> into the microcontroller.
> 
> The CoCo 3 itself is a stock model with 512K of RAM.
> 
> But from what you're saying, maybe I have a high order address line
> hosed up or something.  I'll double check those again with the scope
to
> verify.
> 
> Who knows. Maybe I've just got bit addr15 and addr14 shorted or
> something goofy.
> 
> 
> Thanks for your help.
> 
> Dave 
> 
 ><snip>

I was about to suggest the same thing. Why don't you scan memory from 
$0-$7FFF in both normal and 32K ROM mode and see if the ROMs echo in the

$0-$7FFF region. If they do, then both your high order bits and RAM/ROM 
selection isn't working correctly.

It is a result similar to a 128K Coco3 when the MMUs are set to $00. 
Some early programs needed to be rewritten when 512K boards showed up 
because the programs ignored bit high order MMU bits.


-- 
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco





More information about the Coco mailing list