[Coco] Need utility to read Flex-09 floppies.

Stephen H. Fischer SFischer1 at MindSpring.com
Sun Nov 30 20:20:00 EST 2003


Hi,

It may not be of help, but I have the Flex "Adaptation Guide" manual for
"Unknown" computers.

I.E. You build a floppy disk controller and then write the bootstrap code
using an example in the manual. A short and very simple boot loader used
only to get started.

Not a easy way to do it when you have just purchased two miss - aligned disk
drives.

Worked much better after dealer replaced the drives.

And on a SYM-1 if you believe it. I have perhaps the only upgrade for the
SYM-1 from the 6502 CPU to the 6809 CPU (Satellite board required).

Then the display and keyboard have to be built and the software written.
(Display was a SYM-(Perhaps 2) and hand wired keyboard)

I never really did anything until I got my first CoCo.

Stephen H. Fischer <sfischer1 at mindspring.com>

----- Original Message ----- 
From: "John E. Malmberg" <wb8tyw at qsl.net>
To: <coco at maltedmedia.com>
Sent: Sunday, November 30, 2003 8:46 AM
Subject: [Coco] Need utility to read Flex-09 floppies.


> Hello all,
>
> I found my Flex-09 floppies yesterday, and tried to copy them to a PC to
> try to see how Flex-09 would run on an emulator.
>
> The problem is that the first track on a Flex-09 floppy, which has the
> boot loader is in single density.
>
> I can not find an API to read this from a PC.
>
> I can read every other track of a Flex-09 floppy, but not track 0.
>
> The other issue with emulation is how to store that information in a
> floppy image so that one of the emulators can read it.
>
> It looks to me that what I will need to do is dissasemble the flex-09
> boot code and modify it to use double density, and possibly other stuff.
>
> Any leads would be appreciated.  Even ones that would copy the files to
> a COCO formatted floppy under either Flex-09 or ROM DISK BASIC.
>
> Thanks,
> -John





More information about the Coco mailing list