[Coco] Max-10 Dongle Theory

[John Collyer]

No the Hi-Res module plugged into the Right joystick input at the back of
the CoCo 3.  The joystick or mouse plugged into the Hi-Res module and the
Clicker plugged into the cassette port.  It was round and about 2 inches in
diameter.

John Collyer

----- Original Message ----- 
From: "Dave Poitras" <dave at cococentral.org>
To: <coco at maltedmedia.com>
Sent: Saturday, November 15, 2003 8:53 PM
Subject: Re: [Coco] Max-10 Dongle Theory


> The Colorware "dongle" looked exactly like the Tandy Hi-Res adapter, only
it
> had a yellow "Colorware" label on it.  I believe it was Chris Hawk of
> Hawksoft fame that made the adapter that had a switch allowing it to be
used
> either way. If I find mine, I will scan it & upload it to my site.
>
> Dave.
>
>
> ----- Original Message ----- 
> From: "Neil Morrison" Subject: Re: [Coco] Max-10 Dongle Theory
>
>
> >
> > It was a simple doo-hickey as I recall. If I ever come across it I'll
> > scan and post it. It was like the Hi-Res interface I think, in fact I
> > believe there was a switched one that could emulate either.
> >
> > Neil
> >
> > ----- Original Message ----- 
> > From: <KnudsenMJ at aol.com>
> >
> >
> > > Was that a true "dongle", or a high-res interface with an A-D
> > converter
> > > inside a Pak?
> > > I knew all this once too, but the CRAFT virus is making the
> > ounds.  --Mike K.
> >
> >
> > -- 
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
>
>
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>