[Coco] Help with Nitros9 on SDC?

[Don Barber]

Openned it up (again) to check. Nothing seemed loose. Pushed everything 
down to double-check; no change in behavior. Thanks for the suggestion.

Don

On 1/12/22 4:16 PM, L. Curtis Boyle wrote:
> I know that Nick Marentes has found that the main chip in the SDC sometimes works it’s way loose and becomes erratic. He usually tried to push it back down, or clean it with contact cleaner and then reseat it. Maybe that might work in your case?
>
> L. Curtis Boyle
> curtisboyle at sasktel.net
>
> TRS-80 Color Computer Games website
> http://www.lcurtisboyle.com/nitros9/coco_game_list.html
>
> NitrOS-9 Ease of Use (EOU) Project
> http://www.lcurtisboyle.com/nitros9/nitros9.html
>
>
>
>
>> On Jan 12, 2022, at 2:19 PM, Don Barber <don at dgb3.net> wrote:
>>
>> Good idea. But same issue.
>>
>> Thanks,
>>
>> Don
>>
>> On 1/12/22 9:41 AM, michaelkline704 at gmail.com wrote:
>>> Hi Don,
>>>
>>> This is just a thought... It may help to point more to the SDC. Do a RUN at 1 command to have it just load DECB instead of the combined SDC command structure. Then boot NITROS and see if you can get it loaded.
>>>
>>> Michael
>