[Coco] Getting back in with CoCo & have a few questions
Kevin Becker
kevin at kevinbecker.org
Tue May 12 14:31:54 EDT 2020
Lot's of NitrOS9 experts will surely chime in, but I'd recommend
checking out the Ease of Use project
http://www.lcurtisboyle.com/nitros9/nitros9.html
On Tue, 2020-05-12 at 14:21 -0400, Stephen Pereira wrote:
> Good afternoon, folks,
>
> I set aside the CoCo and sold off most of my equipment a couple of years ago. Now, I am hearing the call again and have been slowly building back up my equipment. I was able to purchase a good working CoCo 3 on eBay for a good price. I contacted Ed and purchased an SDC. I also contacted the folks who make the Switch-A-Roo and purchased one (I also purchased the other bits to get a good display on my system.) Wow, that Switch-A-Roo interface is the answer to all my display problems! Very highly recommended for CoCo 3 systems!
>
> So, here I am with my stock 128K CoCo 3 system, with my SDC. Everything is running fine. I contacted Mark at Cloud-9 a week ago and shortly I hope to have a 2MB CoCo 3 with 6309 processor installed coming to me.
>
> Once I have my upgraded CoCo 3 system with lots of memory operating, I know that I will want to be trying to get back into NitrOS-9.
>
> Here is my question: In the pile of DSK images available for NitrOS-9, which one should I use that will properly operate from my SDC? The 6309 system with 2MB RAM will be the target system. While I’m waiting for that system to arrive, I suppose I could play around with the 6809 version, to get back into it and become familiar again with the system commands, and how to get things done in NitrOS-9.
>
> Thanks very much, in advance, for your patience and any pointers that you may be able to offer.
>
> smp
> - - -
> Stephen Pereira
> Bedford, NH 03110
> KB1SXE
>
>
>
More information about the Coco
mailing list