[Coco] pyDriveWire Q

[Walter Zambotti]

This starts pyDW with a network port for use with becker on VCC or 
OVCC.  It does work!

pyDriveWire --ui-port 6800 --accept --port 65504

On 3/5/20 7:54 am, coco at jechar.ca wrote:
>
> I am now wanting to try pyDrivewire with the OVCC emulator
> what do I replace the -p /dev/ttyUSB0 with to tell it to use
> a network connection and are there any sample config files for
> multiple instance connections ?
>
> On 2020-05-02 19:48, coco at jechar.ca wrote:
>> Thanks adding my user to the dialout group worked on ubuntu.
>>
>>
>> On 2020-05-02 16:41, Mathieu Chouinard wrote:
>>> On Sat, May 2, 2020 at 3:57 PM <coco at jechar.ca> wrote:
>>>>
>>>>
>>>> I noticed that the syntax --ui-port 6800 is incorrect for Linux at 
>>>> least
>>>> replace it
>>>> with -U 6800 also the ui folder must be the subdirectory of your 
>>>> current
>>>> path.
>>>> In Linux your user must be a member of group dip thats all you need 
>>>> for
>>>> Linux Mint
>>>> I found however that in Ubuntu it would only work if I ran as root,
>>>>
>>>> sudo ./pyDriveWire -U 6800 -p /dev/ttyUSB0 --speed 115200
>>> add your user to the dialout group
>>>
>>>
>