[Coco] CoCoSDC on TANO Dragon

[rietveld rietveld]

Ok    np    i have patched the normal SDC updater to flash dosplus 5.0 instead of SDC dos      i can send you a link to it as soon as i put it in my drop box tonight

Sent from my BlackBerry — the most secure mobile device
From: varmfskii at gmail.com
Sent: August 4, 2020 9:23 AM
To: coco at maltedmedia.com
Reply to: coco at maltedmedia.com
Subject: Re: [Coco] CoCoSDC on TANO Dragon

My SDC is one of the very earliest. It definitely does not have anything
other than SDC-DOS and standard DECB on it.

On Tue, Aug 4, 2020, 09:13 rietveld rietveld <rietveldh at hotmail.com> wrote:

> If your sdc is less then a few years old it will already have DOSPLUS 5 on
> it.   you just need to add the boot spacebar program to the autoexec file
>
> https://youtu.be/sj1X0g494vA
>
>
> Sent from my BlackBerry — the most secure mobile device
> From: varmfskii at gmail.com
> Sent: August 4, 2020 8:50 AM
> To: coco at maltedmedia.com
> Reply to: coco at maltedmedia.com
> Subject: Re: [Coco] CoCoSDC on TANO Dragon
>
> So, I need to put the raw bin from someplace like colorcomputerarchive,,
> write a program to put it into memory, use the sdc-doc commands to write it
> to one of the banks on the sdc, then set the jumpers and I should be good?
>
> On Tue, Aug 4, 2020, 06:02 rietveld rietveld <rietveldh at hotmail.com
> <mailto:rietveldh at hotmail.com>> wrote:
>
> > You need to move both jumpers .    also if you are using an older SDC
> then
> > you should upgrade the rom to DOSPLUS 5.0.     when You run 5.0 you can
> > autostart SDCX
> >
> >
> > SDC jumper settings for a Tano Dragon https://imgur.com/gallery/YedO8GD
> >
> >
>
> --
> Coco mailing list
> Coco at maltedmedia.com<mailto:Coco at maltedmedia.com>
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco