[Coco] CoCoSDC on TANO Dragon

rietveld rietveld rietveldh at hotmail.com
Tue Aug 4 09:13:01 EDT 2020


If your sdc is less then a few years old it will already have DOSPLUS 5 on it.   you just need to add the boot spacebar program to the autoexec file

https://youtu.be/sj1X0g494vA


Sent from my BlackBerry — the most secure mobile device
From: varmfskii at gmail.com
Sent: August 4, 2020 8:50 AM
To: coco at maltedmedia.com
Reply to: coco at maltedmedia.com
Subject: Re: [Coco] CoCoSDC on TANO Dragon

So, I need to put the raw bin from someplace like colorcomputerarchive,,
write a program to put it into memory, use the sdc-doc commands to write it
to one of the banks on the sdc, then set the jumpers and I should be good?

On Tue, Aug 4, 2020, 06:02 rietveld rietveld <rietveldh at hotmail.com<mailto:rietveldh at hotmail.com>> wrote:

> You need to move both jumpers .    also if you are using an older SDC then
> you should upgrade the rom to DOSPLUS 5.0.     when You run 5.0 you can
> autostart SDCX
>
>
> SDC jumper settings for a Tano Dragon https://imgur.com/gallery/YedO8GD
>
>

--
Coco mailing list
Coco at maltedmedia.com<mailto:Coco at maltedmedia.com>
https://pairlist5.pair.net/mailman/listinfo/coco


More information about the Coco mailing list