[Coco] OS-9 Level1 Version 02.00.00 FYI
Walter Zambotti
zambotti at iinet.net.au
Fri Apr 17 01:37:18 EDT 2020
I had a go with OVCC and the same result.
Stuck at entering the date.
An ident of the OS9Boot file from that floppy shows
IOman
RBF
CCDisk
DD
D0
D1
SCF
CCIO
CO32
TERM
PRINTER
P
RS232
T1
PipeMan
Piper
Pipe
Clock
SysGo
Shell
The startup does a :
SETIME </TERM
That's it!!!
Could the SysGo be failing to start the shell with the correct device?
Walter
On 2020-04-17 09:21, Robert Gault wrote:
> There is a .zip in the archive
> https://colorcomputerarchive.com/repo/Disks/Operating%20Systems/OS-9%20Level%201%20v02.01.00%20(Tandy).zip
>
> which freezes with VCC on a key stroke when asked for the date. The
> same OS9-L1V201-SYS.dsk works with MAME/MESS in Coco3 mode.
>
> This particular OS-9 version on boot says
> Phonenix release 11/04/2002
> HTTP://COCOOS9.SOURCEFORGE.NET
> when booting.
>
> So, there may still be a problem with VCC emulation.
>
> Robert
>
> L. Curtis Boyle wrote:
>> Correct. That was fixed in OS9 Level 1 version 2.00, since they knew
>> the Coco 3 was coming out. Versions 1.00 and 1.01 both do not work on
>> a Coco 3, for the reason that William has stated.
>>
>> L. Curtis Boyle
>> curtisboyle at sasktel.net
>>
>>
>>
>>> On Apr 16, 2020, at 2:01 PM, William Astle <lost at l-w.ca> wrote:
>>>
>>> That's probably because they overwrite the FExx page when they load,
>>> and, thus, the interrupt vectors get hosed.
>>>
>>> On 2020-04-16 1:58 p.m., David Ladd wrote:
>>>> Thank you sir.
>>>> Yeah OS-9 L1 normally doesn't work with VCC, and not sure why.
>>>> NitrOS-9 L1
>>>> also doesn't work on VCC either.
>>>> That is why it is always best to have real hardware around for
>>>> testing of
>>>> stuff :D
>>>
>>>
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>
>>
>>
>
More information about the Coco
mailing list