[Coco] VCC 2.0.2 with full 6309 emulation. Runs Nitros9 EOU 6309.
Bill Pierce
ooogalapasooo at aol.com
Thu Dec 5 20:04:43 EST 2019
Walter, I'm running Win 10 Pro on a Skytech AMD 6 core 3.5ghz w/8 gig memory and GeForce GTX 1050Ti Grphics w/8 gig
All other versions of VCC from 1.41 to 2.0.1c, all run properly.
-----Original Message-----
From: Walter Zambotti <zambotti at iinet.net.au>
To: 'CoCoList for Color Computer Enthusiasts' <coco at maltedmedia.com>
Sent: Thu, Dec 5, 2019 7:44 pm
Subject: Re: [Coco] VCC 2.0.2 with full 6309 emulation. Runs Nitros9 EOU 6309.
Bill
What version of windows are you running?
Walter
-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Bill Pierce via Coco
Sent: Friday, 6 December 2019 8:01 AM
To: coco at maltedmedia.com
Cc: Bill Pierce <ooogalapasooo at aol.com>
Subject: Re: [Coco] VCC 2.0.2 with full 6309 emulation. Runs Nitros9 EOU 6309.
Walter, I've tried with both the old and new DLLs. I get the same results each way. When I click insert on the drive/disk insert, I see/hear my HD spin for a second (even get the windows spinny thingy), but then no action. At that point, I can click and do other things, which when a dialog box is up, you can do nothing outside (in VCC) until it's closed so that tells me the box never opened.
I was running it from a folder on my external HD, but I've since moved it to my system HD to see if that made a difference, but it didn't.
As I said before, once I manually edit the vcc.ini, everything runs fine (so far).
-----Original Message-----
From: Walter Zambotti <zambotti at iinet.net.au>
To: Bill Pierce via Coco <coco at maltedmedia.com>
Sent: Thu, Dec 5, 2019 6:24 pm
Subject: Re: [Coco] VCC 2.0.2 with full 6309 emulation. Runs Nitros9 EOU 6309.
Bil
That is odd. I'm not having the same issue.
Did you also replace all the dlls?
I have noticed on occasion that dlls from builds with different compile/build options can render the dlls to be problematic.
It's always best if the exe and dlls are from the same build.
However if you already did that then I'm not sure.
Walter
Sent from my Xperia by Sony smartphone
---- Bill Pierce via Coco wrote ----
>Ok, had time for some testing. Everything runs fine once setup, but I still do not get ANY file dialog boxes to come up for anything but VCC's initial cartridge slot (not mpi) and the print capture file.
>The mpi slots, fd502 drives, fd502 config/external rom and cassette load dialog boxes are not coming up. I have to insert them by manually editing the vcc.ini file.
>
>I just now noticed that the "External Rom" isn't loading, even when I edit the vcc.ini manually. It's defaulting to the last used rom.
>
>Again, this is in Win 10 Pro.
>
>Bill
>
>
>
>
>--
>Coco mailing list
>Coco at maltedmedia.com
>https://pairlist5.pair.net/mailman/listinfo/coco
--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco
--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco
--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco
More information about the Coco
mailing list