[Coco] Using Rick Adam's DELPHIterm 3.1 to connect a Coco3 to a TRS80 PT210
rietveld rietveld
rietveldh at hotmail.com
Wed Oct 17 13:54:35 EDT 2018
The PT210 does have a built in thermal 80 column printer but I don't think it was designed to operate as a standalone printer. But it does work as a stand alone typewriter when used in 'off line' mode
Sent from my BlackBerry
Original Message
From: John W. Linville
Sent: Wednesday, October 17, 2018 1:45 PM
To: CoCoList for Color Computer Enthusiasts
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] Using Rick Adam's DELPHIterm 3.1 to connect a Coco3 to a TRS80 PT210
If what Art describes is the issue you are having, you might also
want to review this:
http://retrotinker.blogspot.com/2016/08/using-receipt-printer-with-cocomc-10.html
That blog entry is specific to the MC-10, but the concept transfers
to the CoCo as well.
Hth!
John
On Wed, Oct 17, 2018 at 01:35:03PM -0400, Arthur Flexser wrote:
> Many basic printers of that era had a dip switch that selected whether the
> printer would do a linefeed on CR alone, as the CoCo generally outputs, or
> whether the printer required an explicit linefeed character in addition to
> the CR. Have you checked the docs for whether that option is available?
> If the printer was doing carriage returns only with no linefeed,
> overwriting each line with the next line, the wrong dip switch setting
> might be where the problem lies.
>
> If there is no dip switch, it is also possible that the printer accepts
> some sort of control code (usually an escape byte plus another byte or two)
> that will put it into the mode for generating an automatic linefeed when
> sent a carriage return.
>
> Art
>
> On Wed, Oct 17, 2018 at 1:20 PM, rietveld rietveld <rietveldh at hotmail.com>
> wrote:
>
> >
> > All very good points but the reason I made the video was to show that
> > DELPHITERM was the only terminal program that I could get to properly work
> > with the PT210 The deluxe rs232 paks terminal program works but will not
> > issue a proper carriage return. The paper would not advanced up unless the
> > terminal program transmitted a full 80 characters, either full or blank
> > DelphiTerm did work after I setup the basic loader with the terminal
> > settings including the PT210 s max baud rate of 300
> >
> >
> > Sent from my BlackBerry
> > Original Message
> > From: Salvador Garcia via Coco
> > Sent: Wednesday, October 17, 2018 11:10 AM
> > To: CoCoList for Color Computer Enthusiasts
> > Reply To: CoCoList for Color Computer Enthusiasts
> > Cc: Salvador Garcia
> > Subject: Re: [Coco] Using Rick Adam's DELPHIterm 3.1 to connect a Coco3 to
> > a TRS80 PT210
> >
> >
> > And if you get any alcohol on the printout, the fading will be
> > instantaneous. :-D
> >
> > The only way to be sure is to either scan the thermal printout or get a
> > copy of it using a tried and true copy machine.
> >
> > Salvador
> > On Wednesday, October 17, 2018, 2:09:15 AM CDT, Gene Heskett <
> > gheskett at shentel.net> wrote:
> > <snip>
> > Just be aware that those thermal paper printouts have a very poor shelf
> > life, fading into the sunset in 6 months or less. Higher storage temps
> > and light exposure hasten this, a lot. So don't figure on going back
> > and refreshing you memory by re-reading it 2 years later.
> >
> > <snip>
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
> >
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
--
John W. Linville Someday the world will need a hero, and you
linville at tuxdriver.com might be all we have. Be ready.
--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco
More information about the Coco
mailing list