[Coco] CoCo 3 to CGA Monitor

[Kandur]

Here is the coco's RGB connector:
http://p.uio.pw/wp/wp-content/uploads/2014/09/pin-out-of-the-RGB-connector-on-the-bottom-of-the-CoCo-3.jpg

Kandur

Wednesday, January 3, 2018, 8:26:53 AM, you wrote:
> I am trying to make a clean version of an old article on CoCopedia:
> "CoCo-3 RGB to CGA/EGA Adapter"
> https://web.archive.org/web/20160909014106/http://www.cocopedia.com/wiki/index.php/CoCo-3_RGB_to_CGA/EGA_Adapter

> The ASCII diagram of the CoCo 3 port is hard to make out:










> *|[][][][][]| <--Looking at the bottom of the CoCo3|[][]
> [][]|TTTTTTTTTT|||||||||�<--red wire=pin 1 (both
> ends)|||||||||�x|7|x|4|1�.6 x 5 3 1 <--connect toDB9 pin# (x=no
> connection)___________( 5 4 3 2 1 )\ 6 7 8 9 / <--DB9F (facing the socket
> side)���������*

> Can someone email me an image of what that ASCII art is trying to represent?

> Thanks,

> Carlos