[Coco] NitrOS9 question

[Neal Crook]

Dave,

I recommend that you use my multicomp port as your starting - point.  I
also recommend that you do a L1 port first because it will provide an
easier debug path for and drivers you need. All the code is in the official
repository.

Neal.

On 29 Sep 2017 05:48, "Dave Philipsen" <dave at davebiz.com> wrote:

> I have a question about NitrOS9 that I hope someone can help me with. I
> would like to attempt to port a version of Level 2 over to a new non-CoCo
> platform.  Essentially, I should be able to replicate the functionality of
> the CoCo MMU but I don’t want or need all of the gfx stuff that the CoCo 3
> has.  I would like to initially have it boot up with a shell on a serial
> port but I definitely want to have access to the full 512k via the MMU.  So
> that means I don’t need any of the CoCo keyboard stuff either.  Just
> accessing it via serial port(s).  What image is going to be the best to
> start with? Also, what are the ‘headless’ images?
>
>
> Dave
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>