[Coco] Glenside ide help

[Brett Gordon]

What hardware address is hdbdos set for.  Your card at TA was set for
$ff70.  Yados can kinda roll with the punches, but hdbdos is hard coded for
the addrress.

Brett

On Oct 26, 2017 7:17 PM, "My Email" <rietveldh at hotmail.com> wrote:

> Right now I have one glenside in my coco1 using HDB-DOS and the second
> glenside in my coco3 using ya-dos
>
> Any suggestions would be appreciated
>
> Thanks
>
> Sent from my BlackBerry Passport Red Edition.
>   Original Message
> From: My Email
> Sent: Thursday, October 26, 2017 7:10 PM
> To: Coco mailing list
> Reply To: CoCoList for Color Computer Enthusiasts
> Subject: [Coco] Glenside ide help
>
>
> Hi. I was having trouble with my coco recognizing my glenside(the one that
> I had working all day at the Tandy Assembly). So I got  a second one and
> now I am having‎ trouble with it also.   It leads me to believe that it's
> something I am doing and not the hardware
>
> I used a coco1 and coco3.
>
> 1. Plug modified FD (with hdbdos ) into glenside header
>
> 2. Plug glenside (address set to 50) into slot 4( and set slot select to 4)
>
> 3. Turn on power to HD(let it spin up) which it does
>
> 4. Turn on MPI then coco
>
> 5. ‎HDB-DOS searches then reports 'no hard drive found'
>
> What am I doing wrong?
>
>
> Sent from my BlackBerry Passport Red Edition.
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://eur02.safelinks.protection.outlook.com/?url=
> https%3A%2F%2Fpairlist5.pair.net%2Fmailman%2Flistinfo%
> 2Fcoco&data=02%7C01%7CChad.A.Johnson%40hotmail.com%
> 7Cb1b3654bba3946a7857d08d51cc6ae6d%7C84df9e7fe9f640afb435aaaaaaaa
> aaaa%7C1%7C0%7C636446562013015533&sdata=2dL2nWQohkfcqtGnCoGOFK6b%2BZ%
> 2BX9WfuPPlesqH%2BVeg%3D&reserved=0
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>