[Coco] Possible CoCo3FPGA Analog board run

[Zippster]

Ok, great Brendan.  :)

We’re up to 13 names, so looking good so far to get at least 20…

- Ed


Salvador Garcia
Eric Verble
Mark Kohler
Fred Ford
Fabio
John B
Malcom (Grumpyx)
Jerry Adams
Jim Veneskey
Scott Wendt
Dwight Bazinet
Rob Rosenbrock
Brendan Donahe



> On Oct 19, 2017, at 8:43 PM, Brendan Donahe <brendan at polylith.com> wrote:
> 
> Ed, I have ordered a DE1 board and would like to buy an analog board from
> you, as well.
> 
> Thanks,
> Brendan
> 
> On Thu, Oct 19, 2017 at 8:39 PM, Zippster <zippster278 at gmail.com> wrote:
> 
>> Ok Rob, I’ll put you on the list.
>> 
>> I haven’t been over on the Yahoo group for a while…
>> 
>> - Ed
>> 
>> 
>>> On Oct 19, 2017, at 8:37 PM, Rob Rosenbrock <bester at adamswells.com>
>> wrote:
>>> 
>>> I'm in that group as well, and expressed interest
>>> 
>>> Sent from my iPad
>>> 
>>>> On Oct 19, 2017, at 7:12 PM, Bill Pierce via Coco <coco at maltedmedia.com>
>> wrote:
>>>> 
>>>> Ed, there are several people on the Coco3FPGA group showing interest as
>> well. Some do not subscribe to this list (yet), so you may want to repost
>> this there.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> Bill Pierce
>>>> "Charlie stole the handle, and the train it won't stop going, no way to
>> slow down!" - Ian Anderson - Jethro Tull
>>>> 
>>>> My Music from the Tandy/Radio Shack Color Computer 2 & 3
>>>> https://sites.google.com/site/dabarnstudio/
>>>> Co-Contributor, Co-Editor for CocoPedia
>>>> http://www.cocopedia.com/wiki/index.php/Main_Page
>>>> 
>>>> E-Mail: ooogalapasooo at aol.com
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> -----Original Message-----
>>>> From: Zippster <zippster278 at gmail.com>
>>>> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
>>>> Sent: Thu, Oct 19, 2017 5:26 pm
>>>> Subject: [Coco] Possible CoCo3FPGA Analog board run
>>>> 
>>>> Hello everyone,It’s come to my attention that there may be enough
>> demand to produce anotherrun of analog boards for the CoCo3FPGA project.
>> It’s been a little over a yearsince the first run was made, and it seems it
>> may be time for another.The Analog board attaches to the DE1 FPGA unit
>> through the two GPIO headersand adds the following hardware to the
>> CoCo3FPGA…An additional serial port (DB9), Wi-fi module, RTC clock module,
>> 2 Joystick ports,4MB of additional RAM, and an expansion header with the
>> remaining unused GPIOpins (and power/ground) is added to the CoCo3FPGA
>> system.Here’s a page on them from my website to see what they look like…<
>> https://sites.google.com/site/thezippsterzone/coco-3-fpga <
>> https://sites.google.com/site/thezippsterzone/coco-3-fpga>>These would
>> come complete with a new set of standoffs and new top plate just as the
>> earlier run and will probably be around $100 per set depending on the size
>> of the run.If I can get at least 20 names we can make a go of it.Please let
>> me know if you’re interested.Thanks,- EdInterest list - 10/19/17John
>> BGrumpyxJerry AdamsJim Veneskey-- Coco mailing listCoco at maltedmedia.comhttps
>> ://pairlist5.pair.net/mailman/listinfo/coco
>>>> 
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>> 
>>> 
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>> 
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco