[Coco] Possible CoCo3FPGA Analog board run

Rob Rosenbrock bester at adamswells.com
Thu Oct 19 21:37:54 EDT 2017


I'm in that group as well, and expressed interest

Sent from my iPad

> On Oct 19, 2017, at 7:12 PM, Bill Pierce via Coco <coco at maltedmedia.com> wrote:
> 
> Ed, there are several people on the Coco3FPGA group showing interest as well. Some do not subscribe to this list (yet), so you may want to repost this there.
> 
> 
> 
> 
> 
> Bill Pierce
> "Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull
> 
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Co-Contributor, Co-Editor for CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> 
> E-Mail: ooogalapasooo at aol.com
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Zippster <zippster278 at gmail.com>
> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Sent: Thu, Oct 19, 2017 5:26 pm
> Subject: [Coco] Possible CoCo3FPGA Analog board run
> 
> Hello everyone,It’s come to my attention that there may be enough demand to produce anotherrun of analog boards for the CoCo3FPGA project.  It’s been a little over a yearsince the first run was made, and it seems it may be time for another.The Analog board attaches to the DE1 FPGA unit through the two GPIO headersand adds the following hardware to the CoCo3FPGA…An additional serial port (DB9), Wi-fi module, RTC clock module, 2 Joystick ports,4MB of additional RAM, and an expansion header with the remaining unused GPIOpins (and power/ground) is added to the CoCo3FPGA system.Here’s a page on them from my website to see what they look like…<https://sites.google.com/site/thezippsterzone/coco-3-fpga <https://sites.google.com/site/thezippsterzone/coco-3-fpga>>These would come complete with a new set of standoffs and new top plate just as the earlier run and will probably be around $100 per set depending on the size of the run.If I can get at least 20 names we can make a go of it.Please let me know if you’re interested.Thanks,- EdInterest list - 10/19/17John BGrumpyxJerry AdamsJim Veneskey-- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco



More information about the Coco mailing list