[Coco] Possible CoCo3FPGA Analog board run

[John B]

Put me down for one.

On Thu, Oct 19, 2017 at 5:26 PM, Zippster <zippster278 at gmail.com> wrote:

> Hello everyone,
>
> It’s come to my attention that there may be enough demand to produce
> another
> run of analog boards for the CoCo3FPGA project.  It’s been a little over a
> year
> since the first run was made, and it seems it may be time for another.
>
> The Analog board attaches to the DE1 FPGA unit through the two GPIO headers
> and adds the following hardware to the CoCo3FPGA…
>
> An additional serial port (DB9), Wi-fi module, RTC clock module, 2
> Joystick ports,
> 4MB of additional RAM, and an expansion header with the remaining unused
> GPIO
> pins (and power/ground) is added to the CoCo3FPGA system.
>
> Here’s a page on them from my website to see what they look like…
> <https://sites.google.com/site/thezippsterzone/coco-3-fpga <
> https://sites.google.com/site/thezippsterzone/coco-3-fpga>>
>
> These would come complete with a new set of standoffs and new top plate
> just as the
> earlier run and will probably be around $100 per set depending on the size
> of the run.
>
> If I can get at least 20 names we can make a go of it.
>
> Please let me know if you’re interested.
>
> Thanks,
>
> - Ed
>
>
>
> Interest list - 10/19/17
>
> John B
> Grumpyx
> Jerry Adams
> Jim Veneskey
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>