[Coco] CoCoSDC

rietveld rietveld rietveldh at hotmail.com
Sun Nov 19 15:16:56 EST 2017


Sorry I wasn't able to help. I have two sdc's one has the really old firmware and the other the newest.   I have not seen this problem with either

Sent from my BlackBerry Passport Red Edition.
  Original Message
From: Randall Kindig
Sent: Sunday, November 19, 2017 3:06 PM
To: CoCoList for Color Computer Enthusiasts
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] CoCoSDC


Henry (I think your first name is Henry), I very much appreciate your help.

However, that did not work.  Again, for everyone, the issue is that while I can mount a DSK file, it acts as though the disk image is empty.  Thus, I can’t run anything off the disk image.

Sorry, guys, I should have given more info.

Other than SDC-DOS only being version 1.0.1, everything looks fine on the boot-up screen.
I used the "DIR -" command, and get a directory of the SDC card.  No problem.

Then, I mount one of the disk images to drive 0.  It says OK and shows mounted when I issue a DRIVE command.
I then issue a DIR command and the disk image shows empty.  It does this for any disk image I use.





> On Nov 19, 2017, at 2:41 PM, Randall Kindig <randall.kindig at gmail.com> wrote:
>
> Nope, see my other email which is awaiting moderator approval, probably because I sent some pictures.  It will not boot to the SDC Explorer either.
>
> There’s something fundamentally wrong here.
>
> Anyone else have an idea?
>
> thanks
>
>
>
>> On Nov 19, 2017, at 2:35 PM, rietveld rietveld <rietveldh at hotmail.com> wrote:
>>
>> That's what I use.
>>
>> Put the. Dsk and. Cfg files on the root of the card.
>>  This will make the sdc autoboot to the sdc explorer
>> Sent from my BlackBerry Passport Red Edition.
>> Original Message
>> From: Randall Kindig
>> Sent: Sunday, November 19, 2017 2:33 PM
>> To: CoCoList for Color Computer Enthusiasts
>> Reply To: CoCoList for Color Computer Enthusiasts
>> Subject: Re: [Coco] CoCoSDC
>>
>>
>> It’s an 8GB microSD in an SD adapter.
>>
>> I formatted it with no issues to FAT32.
>>
>>
>>> On Nov 19, 2017, at 1:23 PM, rietveld rietveld <rietveldh at hotmail.com> wrote:
>>>
>>> As a side note, what size is your SD card?   There are problems formating to FAT on smaller and very large cards
>>>
>>> Sent from my BlackBerry Passport Red Edition.
>>> Original Message
>>> From: rietveld rietveld
>>> Sent: Sunday, November 19, 2017 1:18 PM
>>> To: Randy Kindig
>>> Reply To: CoCoList for Color Computer Enthusiasts
>>> Subject: Re: [Coco] CoCoSDC
>>>
>>>
>>> I just sent u a zip of SDCX.
>>>
>>> Unzip this and install to the root of the SD card.
>>> When u turn on your coco the SDC will auto boot the SDC explorer menu.   This should display every DIR and. Dsk on the SD card
>>>
>>> Sent from my BlackBerry Passport Red Edition.
>>> Original Message
>>> From: Randy Kindig
>>> Sent: Sunday, November 19, 2017 1:14 PM
>>> To: CoCoList for Color Computer Enthusiasts
>>> Reply To: CoCoList for Color Computer Enthusiasts
>>> Subject: Re: [Coco] CoCoSDC
>>>
>>>
>>> These disk images are at the root directory
>>>
>>> Sent from my iPhone
>>>
>>>> On Nov 19, 2017, at 1:07 PM, rietveld rietveld <rietveldh at hotmail.com> wrote:
>>>>
>>>> Are the directories 8 characters or less? You need to use the 8 and 3 rule the same way u would on a real disk.   xxxxxxxx.xxx
>>>>
>>>>
>>>> Sent from my BlackBerry Passport Red Edition.
>>>> Original Message
>>>> From: Randall Kindig
>>>> Sent: Sunday, November 19, 2017 12:38 PM
>>>> To: CoCoList for Color Computer Enthusiasts
>>>> Reply To: CoCoList for Color Computer Enthusiasts
>>>> Subject: [Coco] CoCoSDC
>>>>
>>>>
>>>> Ok, guys, I apologize up front.  I’m probably an idiot.
>>>>
>>>> I’m using my CocoSDC for the very first time.  I created an SD card with various .DSK images on it.  I have the CocoSDC manual so wonderfully provided by members of this group (much appreciated!)  However, every DSK image I load up (using the DRIVE command), and then use the DIR command shows an empty directory.
>>>>
>>>> Who can be the first one to tell me what stupid thing I’m doing or not doing? :)
>>>>
>>>> I can’t even update the firmware and SDC DOS on this because I can’t run the setup program as a result.
>>>>
>>>> thanks
>>>>
>>>> Randy
>>>>
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>>
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


More information about the Coco mailing list