[Coco] Getting Multiview or MShell going?

[Walter Zambotti]

I should have elaborated on the actual problem.

When I enter :

Drive0
?SN Error
Dos
?SN Error

I tend to vaguely recall if the VCC execution directory was not the same as the VCC home directory problems may arise.

Some success!

I have to hard reset VCC twice before it starts working?!?!?!?

What's going on here.

Walter

-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Walter Zambotti
Sent: Thursday, 25 May 2017 8:46 AM
To: 'CoCoList for Color Computer Enthusiasts' <coco at maltedmedia.com>
Subject: Re: [Coco] Getting Multiview or MShell going?

Thanks for the link.

I have upgraded from 2.0 to 2.01b and now the DECB does not recognise the :

Drive0
Dos

Command combination.

What must I use instead to boot to OS9?

-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Robert Gault
Sent: Wednesday, 24 May 2017 9:21 PM
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Subject: Re: [Coco] Getting Multiview or MShell going?

Walter Zambotti wrote:
> Trying to get up to speed with a lot of things.
>
>
>
> Where can I find latest versions of:
>
>
>
> VCC
>

The latest release, 2.01b Feb. 6, should be at https://github.com/VCCE/VCC/releases

> Nitros09 disk or drive images suitable for VCC
>
The latest disks should be at
https://nitros9.sourceforge.io/snapshot/
Use the disk appropriate for your system!
Also look on
http://www.colorcomputerarchive.com/coco/Disks/

Any disk that works with a real Coco should work with MESS/MAME and VCC. Exceptions are some copy-protected disks. It is just the question of how to make .dsk and .os9 disk images for a PC.

> Basic09 (the 6309 version I have is buggy)
>

Are you sure that it is buggy rather than you are not using it quite right? :) If it came with a NitrOS-9 release disk, it should be correct but does require a 6309 CPU in either a real Coco or an emulator correctly set for 6309 operation.
Use the disk source above.

> Mshell
>

This is the brain child of Bill Pierce. You can reach him at ooogalapasooo at aol.com and the program can be obtained at https://sites.google.com/site/dabarnstudio/

> Multi-view (probably only one version)
>

Use the NitrOS-9 link given above. Choose the disk appropriate for your system!

>
>
> Questions
>
>
>
> Should I use Mshell or Multiview or any other GUI?
>
>
>
> Walter
>
>
>
>

Personally, I would start without a GUI until I had a basic grasp of what NitrOS-9 is and how it works. Once you have some familiarity with OS-9/NitrOS-9 and decide it would be nice to have shortcuts to activate various functions, then try a GUI to see if it makes things simpler or more complex.
I believe Multi-view was not very popular as it really did not simplify using OS-9.

Robert


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco