[Coco] CocoPi3 Update

Rob Rosenbrock bester at adamswells.com
Wed May 3 08:46:08 EDT 2017 

It would be tempting to do this with pi-top...

Sent from my iPhone

> On May 3, 2017, at 7:52 AM, Ron <ron at kdomain.org> wrote:
> 
> Hi Dave,
> 
> If it's a Raspberry Pi 3, yes.  You would power it off, pull out the RetroPie SD card, replace it with this distribution (on another SD card) and then power it back up.
> 
> It would be up to you to determine if you could merge the two into one.  I've added programs and libraries from alternate repo's, so my guess is it would not work.  RetroPie does have an older version of XRoar available and they do offer MAME, but no idea on what version and if it would have all the tweaks I've added.
> 
> I encourage anyone to experiment -- lot's of talented people here with great ideas.
> 
> Thanks
> 
> -Ron
> 
> 
> 
> 
>> On 05/03/2017 01:05 AM, Dave Regan wrote:
>> Thanks Ron.  Would it be able to be run from the same Raspberry Pi that has retropie and all my other emulators installed?
>> 
>> Get Outlook for iOS<https://aka.ms/o0ukef>
>> ________________________________
>> From: Coco <coco-bounces at maltedmedia.com> on behalf of Ron <ron at kdomain.org>
>> Sent: Tuesday, May 2, 2017 4:16:21 PM
>> To: CoCoList for Color Computer Enthusiasts
>> Subject: Re: [Coco] CocoPi3 Update
>> 
>> Hi Dave,
>> 
>> This is a complete ready-to-run distribution based on Raspbian as a base
>> OS.  Not RetroPie.
>> 
>> Other than just adding the Coco ROMs, this is ready to go.  You would
>> copy the SD card image on to a micro SD card (8GB or higher). Class 10
>> recommended (for speed).  It should boot right up.
>> 
>> 
>> 
>>> On 05/02/2017 06:05 PM, Dave Regan wrote:
>>> I'm getting a RP 3 to take with me when I travel so I can play a little in
>>> the hotel. Sorry for the newbie type question though, but is this something
>>> that works similar to RetroPie that you simply load onto the Pi and then
>>> load the dsk images into a particular subfolder and you're ready to go?
>>> 
>>> On Tue, May 2, 2017 at 3:41 PM, Rietveld Rietveld <rietveldh at hotmail.com>
>>> wrote:
>>> 
>>>> Thanks. Right now I am running VCC using a little ATOM powered PC on a
>>>> stick. It's pretty nice as its only a little bigger than a card reader but
>>>> it is no where as cool as using the Pi.
>>>> 
>>>> 
>>>> ,
>>>>    Original Message
>>>> From: Ron
>>>> Sent: Tuesday, May 2, 2017 6:35 PM
>>>> To: CoCoList for Color Computer Enthusiasts
>>>> Reply To: CoCoList for Color Computer Enthusiasts
>>>> Subject: Re: [Coco] CocoPi3 Update
>>>> 
>>>> 
>>>> I still need to check with Rick Adams, but would like to continue to
>>>> have him host a copy of the SD card image as well as Simon Jonassen.
>>>> 
>>>> The current links (for the old image and documentation) are:
>>>> 
>>>> http://rickadams.org/ronklein/
>>>> http://www.roust-it.dk/coco/ronklein/
>>>> 
>>>> I will also need to update the documentation to reflect all the changes.
>>>> 
>>>> Thanks
>>>> 
>>>> 
>>>>> On 05/02/2017 05:27 PM, Rietveld Rietveld wrote:
>>>>> This looks incredible. How can I get a copy for my rasp pi?
>>>>> 
>>>>> ,
>>>>>     Original Message
>>>>> From: Michael Brant
>>>>> Sent: Tuesday, May 2, 2017 6:19 PM
>>>>> To: CoCoList for Color Computer Enthusiasts
>>>>> Reply To: CoCoList for Color Computer Enthusiasts
>>>>> Subject: Re: [Coco] CocoPi3 Update
>>>>> 
>>>>> 
>>>>> Cool making me really want a rasp pi 3.
>>>>> 
>>>>> On May 2, 2017 4:34 PM, "Glen Hewlett" <glen.hewlett at sympatico.ca>
>>>> wrote:
>>>>>> Hi Ron,
>>>>>> 
>>>>>> That’s a lot of cool updates.  I do appreciate all the effort you are
>>>>>> putting into this SDimage.  I think it will be very useful for anyone
>>>> who
>>>>>> wants to learn about the CoCo or someone who remembers playing with the
>>>>>> CoCo many years ago and wants to give it a try again.  The RPi3 is cheap
>>>>>> and connects to any recent monitor/TV all you need is keyboard and your
>>>>>> good to go in CoCo world. :)
>>>>>> 
>>>>>> Personally using emulators is what got me back into the CoCo, luckily I
>>>>>> still had some of my old CoCo hardware and I’m having a blast with it
>>>> again.
>>>>>> Cheers,
>>>>>> Glen
>>>>>> 
>>>>>>> On May 2, 2017, at 3:37 PM, Ron <ron at kdomain.org> wrote:
>>>>>>> 
>>>>>>> CocoPi3 - ChangeLog - May 2017
>>>>>>> 
>>>>>>> CocoFEST 2017 was a trial run for the CocoPi3 distribution.  I took
>>>> some
>>>>>> time to observe how others looked at it, used it, etc., and made some
>>>>>> enhancements.  Some are minor others are more significant.  I've been
>>>>>> learning quite a bit with this little project, but the best part has
>>>> been
>>>>>> some of the folks I've met and worked with along the way.
>>>>>>> - Quick refresh of some Raspbian packages (i.e. sudo apt-get update;
>>>>>> sudo apt-get upgrade)
>>>>>>> - Updated GCC 6 (as part of Debian's bleeding edge "stretch" repo).
>>>> GCC
>>>>>> 6 is required to compile MAME.
>>>>>>> - Pierre Sarrazin resolved an issue with the cmoc compiler for
>>>>>> Raspbian.  Fix already included with this update.
>>>>>>> - Updated MAME to the latest version (0.185)
>>>>>>> - Updated the Main Menu and included many new entries as well as
>>>> updated
>>>>>> existing ones (over double the options)!
>>>>>>> - Typing 'menu' from any prompt will return to main menu screen
>>>>>>> - Some menu options include additional informational screens/prompts
>>>>>>> - Option for booting Coco 3 with VCCEmuDisk hard drive image.  Includes
>>>>>> NitrOS9 & 255 virtual DECB disks with programs
>>>>>>> - Option for booting Coco 3 (2MB RAM) directly into NitrOS9 using
>>>> latest
>>>>>> image from http://nitros9.sourceforge.net/snapshot/
>>>>>>> - Option for booting Coco 3 (2MB RAM) directly into Fuzix (via YA-DOS).
>>>>>> Internet access provided via 'lwwire' daemon
>>>>>>> - Options still available for Coco 2 (MAME & XRoar) both with Drivewire
>>>>>> support as well as booting into MC-10
>>>>>>> - Updated the scripts to start and stop the DriveWire, lwwire and
>>>> emceed
>>>>>> daemons from main menu
>>>>>>> - Edit Wifi configuration from main menu
>>>>>>> - Adjust RPi3 system volume from main menu (for HDMI and analog ports)
>>>>>>> - Run 'raspi-config' from main menu (resize file system, other
>>>>>> administrative options)
>>>>>>> - Backup existing RPi3 installation to alternate SD card (i.e. clone
>>>>>> entire SD card) from main menu
>>>>>>> - Reboot or shutdown RPi3 (safely) from main menu
>>>>>>> - IP address(es) on main menu screen.  Includes for both WiFi and CAT6
>>>>>>> - System uptime information on main menu screen
>>>>>>> - Daemon status (DriveWire, lwwire and emceed) on main menu screen
>>>>>>> - Emceed server for hosting files to a real MC-10. Requires MCX-128
>>>>>> expansion cartridge & serial to USB adapter
>>>>>>> - DriveWire can still be configured to host files for real Coco's as
>>>>>> well.  Same serial to USB adapter would be required
>>>>>>> - Added additional documentation in Samba share 'doc' folder
>>>>>> (/media/share1/docs).  This includes help with Bluetooth controllers
>>>>>>> Unfortunately, there's too many changes to just provide updated files
>>>>>> for.  As such, it will require downloading a new image.  Going forward,
>>>> I
>>>>>> am working on a way to package updates (perhaps via a CocoPi3 repo for
>>>> use
>>>>>> with apt-get) to save time.
>>>>>>> I plan on recording a video demo of this new version soon and will send
>>>>>> it off to Steve Strowbridge to add to his YouTube channel.  I also need
>>>> to
>>>>>> work with Rick Adams and Simon Jonassen to see about replacing the
>>>> older SD
>>>>>> card image with this new one.
>>>>>>> Thanks!
>>>>>>> 
>>>>>>> 
>>>>>>> --
>>>>>>> Coco mailing list
>>>>>>> Coco at maltedmedia.com
>>>>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>>>> --
>>>>>> Coco mailing list
>>>>>> Coco at maltedmedia.com
>>>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>>>> 
>>>>> --
>>>>> Coco mailing list
>>>>> Coco at maltedmedia.com
>>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>>> 
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>> 
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>> 
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>> 
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco

More information about the Coco mailing list