[Coco] Urgen Inetd issue

phillip taylor ptaylor2446 at gmail.com
Sun Mar 26 11:54:30 EDT 2017


Thanks and I got it to work.

On Fri, Mar 24, 2017 at 9:50 AM, William Carlin <whcarlinjr at gmail.com>
wrote:

> Everything looks right in your configuration.  You have more /XX devices
> than I have (I only use /X0-/X3).  Have you tried eliminating device
> drivers and descriptors down to bare bones and then add them back in one
> subsystem at a time?  I would start with eliminating /X4 - /X7, MyRam and
> /R0, MIDI, /Z1 and /Z2.  Test.  If the error message is resolved then add
> the subsystems back in one at a time until you find point of failure.
>
> What program are you using to telnet into the CoCo?
>
>
> William Carlin
>
> On Thu, Mar 23, 2017 at 9:16 PM, phillip taylor <ptaylor2446 at gmail.com>
> wrote:
>
> > Here is all the information:
> >
> > Boot files:
> >
> > {N2|03}/DD:mdir
> >
> >    Module Directory at 21:07:32
> > REL         Boot        Krn         KrnP2       IOMan       Init
> > RBF         rbdw        dwio        X0          X1          X2
> > X3          X4          X5          X6          X7          EmuDsk
> > DD          H0          rb1773      D0          D1          D2
> > MRAM        R0          SCF         VTIO        KeyDrv      SndDrv
> > JoyDrv      CoWin       CoVDG       Term        W           W1
> > W2          W3          W4          W5          W6          W7
> > V1          V2          scdwp       p           scdwv       N
> > N1          N2          N3          N4          MIDI        Z1
> > Z2          PipeMan     Piper       Pipe        Clock       Clock2
> > GrfDrv      MDir        Shell       Date        DeIniz      Echo
> > Iniz        Link        Load        Save        Unlink      d
> > c           del         Uld         List        Copy        clrd
> > DeInit      inetd
> >
> > {N2|03}/DD:
> >
> > N2|03}/DD/CMDS:ident tsmon
> >
> > Header for:  Tsmon
> > Module size: $0081    #129
> > Module CRC:  $CF7F89 (Good)
> > Hdr parity:  $A8
> > Exec. off:   $001A    #26
> > Data Size:   $01C8    #456
> > Edition:     $08      #8
> > Ty/La At/Rv: $11 $80
> > Prog mod, 6809 obj, re-en, R/O
> >
> > {N2|03}/DD/CMDS:ident inetd
> >
> > Header for:  inetd
> > Module size: $0759    #1881
> > Module CRC:  $3AB0C8 (Good)
> > Hdr parity:  $76
> > Exec. off:   $0021    #33
> > Data Size:   $03D7    #983
> > Edition:     $01      #1
> > Ty/La At/Rv: $11 $81
> > Prog mod, 6809 obj, re-en, R/O
> >
> > Header for:  Login
> > Module size: $04E6    #1254
> > Module CRC:  $A8647D (Good)
> > Hdr parity:  $CA
> > Exec. off:   $015F    #351
> > Data Size:   $024D    #589
> > Edition:     $12      #18
> > Ty/La At/Rv: $11 $81
> > Prog mod, 6809 obj, re-en, R/O
> >
> > {N2|03}/DD/CMDS:more /dd/sys/inetd.conf
> > # inetd configuration file format:
> > # ListenPort <server opts>,Process,Params
> > # valid server options are: telnet auth protect banner
> >
> > # the follow line causes inetd to listen on port 6809 and spawn 'login'
> for
> > a ne
> > w connection
> > # the options cause telnet protocol processing on the server, they use
> the
> > serve
> > r's IP address and geolocation protection
> > # to prevent undesired hosts from connecting, and cause the server to
> > display a
> > banner to the client prior to announcing
> > # the connection to the coco. Adding auth would cause the server to use
> > it's own
> >  authentication prior to connecting the coco
> > # (this feature may be removed in favor of a more secure coco side
> > authenticatio
> > n solution)
> >
> > 6809 telnet protect banner,login,
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
> >
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>


More information about the Coco mailing list