[Coco] VCC direct VHD vs DW

[Bill Pierce]

Wayne, that version is basically a test version and is still being worked on. Also, the Becker port is broken in that version. Hopefully it will get better.
Personally, until things are fixed, I would use the "official" 2.0.1b release until things are made stable. I hope to incorperate James' and Walter's fixes as soon as we work out some bugs. The we can have a new release version.

As for resize/maximize/full screen, I am lucky to have 2 old "square" LCD/VGA monitors. A 13" and a 15". I can maximize or go full screen with no stretch. Full screen looks just like a real Coco on these monitors :-)

 

 

Bill Pierce
"Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page

E-Mail: ooogalapasooo at aol.com

 

 

-----Original Message-----
From: Wayne Campbell <asa.rand at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Fri, Jun 16, 2017 11:55 am
Subject: Re: [Coco] VCC direct VHD vs DW

On VCCs resize. I have the newer version that corrects the aspect ratio infull screen. If you click the maximize button, the display in the window isstill stretched, so that is not working correctly. Also, VCC does notremember the size change if you manually resize it. I finally gave upresizing it and just deal with the small window until these issues arefixed.On Fri, Jun 16, 2017 at 7:01 AM, Bill Pierce via Coco <coco at maltedmedia.com>wrote:> William, you can make VCC's window any size you like. You must go to> "Configuration/Display" and check "Allow Resize". Then resize and maximize> work. If you're using a wide screen monitor, then "Full Screen" will be> stretched, and it's best to manually resize to retain the aspect ratio.> Hopefully, this will be fixed soon. We have a test version (WIP) that> retains aspect on resize and full screen and hope to release it soon.> I didn't realize so many people didn't know how to make VCC larger. It> helps to read the manual :-)>> Walter, as far as just drives, VCC's native drive is 100 times faster than> DW4 drives. Due to DW4's TCP to serial bottleneck, and DW4's buffering, DW4> is actually slower in the emulators than it is on a real Coco (even when> VCC is overclocked).> In VCC, goto "Cartridge/FD-502 Config" and set "Overclock Disk Drives" and> the floppies are fast as well.>> In my software dev setup for writing NitrOS9 software, I have the VCC> drive as my system drive for NitrOS9 (128meg), then I have 8 (yes 8) drives> available in DW4 plus a 256k ramdisk (almost instantaneous). I also run VCC> at 89mhz for fast C compiling speeds and immediate screen refreshes in my> text editor. Do not uncheck the "Throttle" in the config menu though, as> that make EVERYTHING overclock and the keyboard becomes unusable. With just> the CPU overclocked (Config/CPU/Overclock), the keyboard and clock remain> stable. No, this is definately not for gaming... games will run too fast,> but for software development and compiling sources, it makes my VCC Coco> work as fast as my PC (almost).> An example would be compiling my MShell sources... At regular 1.79mhz, it> take more than 5+ hours to compile the 250+ sources. At 89mhz (maxed), it> all compiles in a little over 2 mins!!>>>>>> Bill Pierce> "Charlie stole the handle, and the train it won't stop going, no way to> slow down!" - Ian Anderson - Jethro Tull>> My Music from the Tandy/Radio Shack Color Computer 2 & 3> https://sites.google.com/site/dabarnstudio/> Co-Contributor, Co-Editor for CocoPedia> http://www.cocopedia.com/wiki/index.php/Main_Page>> E-Mail: ooogalapasooo at aol.com>>>>>> -----Original Message-----> From: William Carlin <whcarlinjr at gmail.com>> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>> Sent: Fri, Jun 16, 2017 6:42 am> Subject: Re: [Coco] VCC direct VHD vs DW>> Technically you can have 3 hard drives mounted at one time in VCC.> Youhave the standard Hard Disk 0 RGB style hard drive.  If you use one of> youMPI slots for the Glenside IDE you can also have a master and slave> IDEhard drive(s) mounted as well.I think of DriveWire as the CoCo's version> of network drives or networkattached storage.  You can literally attach> anything to DriveWire.  Fromother downloaded VHD's to floppy disks to disks> located on a web server,ftp server, SMB/CIFS share, inside of a .ZIP file> (mounts VHD but nochanges are written back).  Once you become familiar with> the 'dw' command,you can create scripts to automate most of the drudge work> of ejectingdrives, modifying the 'dmode' parameters of a /Xx device to> adjust the sizeof your "network volume", creating the disk in memory on the> DW server,formatting the drive, writing the drive out to physical disk on> the DWserver, and finally inserting the written disk to complete the> process.I think the feature I use most in DW is the virtual serial ports to> telnetinto NitrOS9.  The VCC window is so small on my laptop I need to use> theWindows telnet in a command prompt in order to see what I'm> typing.Additionally VCC emulates the keyboard just a CoCo and NitrOS9 can> misskeystrokes under heavy load.  When you use telnet, the keyboard is> bufferedand characters are read by the serial port as the NitrOS9 can> accept them.​-- Coco mailing listCoco at maltedmedia.comhttps://> pairlist5.pair.net/mailman/listinfo/coco>> --> Coco mailing list> Coco at maltedmedia.com> https://pairlist5.pair.net/mailman/listinfo/coco>-- WayneThe Structure of I-Codehttp://www.cocopedia.com/wiki/index.php/The_Structure_of_I-Codedecodehttp://cococoding.com/wayne/-- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco