[Coco] FPGA VS Software Emulators

[James Ross]

FPGA’s are widely accepted to be a more accurate because the emulation it’s done at the hardware electrical signal / logic gate / precise clock level timings.  For all practical matter it *is* a hardware logic circuit.

The speed issue w/ FPGA is probably two-fold. 

1) The FPGA must have an overhead of electrical logic that controls the pathways and configures the programmable gates and other logic blocks.  That overhead probably affects the final speed of the device. Otherwise we would see 2 - 4 GHz devices – like we do CPU’s

2) The faster the FPGA the more expensive. So the 50MHz range is what is affordable for hobbyist and low budget digital electronic development. However, you can get faster for more $$$.  I did a quick search, and the claim is made that the Intel Stratix IV is the fastest on the market w/ a Core Clock at 600MHz.

With that said – I read a discussion about a software emulator used in a hardware context.  Someone has a proof of concept / prototype of a 68020 (or higher) emulator running on an (cheap) ARM CPU off a small board w/ the IO’s mapping to the 68020 pins and attaches to a real 68020 socket (I think it was an Amiga). If I can find that thread, on FB, I’ll post it as a follow-up.

In that case the software emulator is written to run on the bare-metal CPU.  NO Operating System.  The emulator controls the precise timing of everything running on the CPU. It’s an interesting concept.  I can see how it is possible.  In that case you would not be able to tell the difference between a FPGA and a Software Emulator by just looking at (and precisely measuring) the output. 

James
________________________________________
From: Coco <coco-bounces at maltedmedia.com> on behalf of Walter Zambotti <zambotti at iinet.net.au>
Sent: Tuesday, July 25, 2017 7:02 AM
To: 'CoCoList for Color Computer Enthusiasts'
Subject: [Coco] FPGA VS Software Emulators

Before I start this is not a one is better than the other debate.



This is about better understanding each technology.



Ok so my initial thoughts regarding FPGA (as I really know nothing) were
hardware simulation should
provide an end product that is more efficient and faster than a general
CPU/software emulator.



However this does not appear to be the case.



The CoCo on a chip project emulates an 8mhz CoCo.

The CoCoFPGA project a 25mhz CoCo.

And VCC on my i5 (3.3 ghz) a 133mhz CoCo.



What causes these differences in end speed?



Why are the two FPGA projects so different in speed?



Why are both FPGA solutions slower than a CPU/software solution?



Is it the particular FPGA hardware itself?



Would high end FPGAs provide a different result?



I've just download the FPGA for Dummies eBook from Altera so I'm starting my
education process.



Walter






--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco