[Coco] WordPak

Carlos Camacho idevgames at gmail.com
Tue Jul 11 21:55:02 EDT 2017


I recently bought a CoCo bundle and it came with WordPak. Ironically, I had
no idea what it was at first because there was an external PCB board with
two POTs attached to the case with electrical tape. That was hiding the
label! Thought it was a synth card for a moment with its RCA plug.

Can someone point me to more info on the WordPak? Think there was alot of
discussion about it on the list recently.

Cheers,
Carlos

On Jul 11, 2017 8:08 PM, <coco-request at maltedmedia.com> wrote:

Send Coco mailing list submissions to
        coco at maltedmedia.com

To subscribe or unsubscribe via the World Wide Web, visit
        https://pairlist5.pair.net/mailman/listinfo/coco
or, via email, send a message with subject or body 'help' to
        coco-request at maltedmedia.com

You can reach the person managing the list at
        coco-owner at maltedmedia.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Coco digest..."


Today's Topics:

   1. Re: A WARNING about Windows 10 Updates... (Steven Hirsch)
   2. Re: 3D printer (S Klammer)
   3. Re: 3D printer (Rietveld Rietveld)
   4. Re: A WARNING about Windows 10 Updates... (James Jones)
   5. Re: 3D printer (Mark Ormond)
   6. Re: 3D printer (Rietveld Rietveld)
   7. Coco flash and SS/C. (Rietveld Rietveld)
   8. Re: Coco flash and SS/C. (Michael Brant)
   9. Re: 3D printer (S Klammer)
  10. Re: 3D printer (Rietveld Rietveld)


----------------------------------------------------------------------

Message: 1
Date: Tue, 11 Jul 2017 17:10:07 -0400 (EDT)
From: Steven Hirsch <snhirsch at gmail.com>
To: Joe Schutts via Coco <coco at maltedmedia.com>
Subject: Re: [Coco] A WARNING about Windows 10 Updates...
Message-ID: <alpine.DEB.2.20.1707111709180.3924 at z87>
Content-Type: text/plain; charset=US-ASCII; format=flowed

On Tue, 11 Jul 2017, Joe Schutts via Coco wrote:

> I've been a faithful Windows user since Windows 3.0 and before that DOS
> 3.0. I just discovered a FLAW or BUG in their UPDATE Process and I
> wanted to warn EVERY Windows 10 User out there about it before it ruins
> their day. If you're like me I tweak EVERY setting for optimum setting
> (making everything run faster), the only thing I DO NOT tweak is the
> Clock Speeds of my CPU, I just buy the fastest CPU out there available.
> Recently I had an update preformed and I noticed that my Ethernet
> Adapter seemed to be running much slower than normal. I then went into
> the Device Manager and checked out the settings. I found out the the
> JUMBO FRAMES on all my Ethernet Adapters had all been changed from 9KB
> MTU to a new setting of DISABLED (and therefore slowing down all my
> Ethernet Adapters). I have yet to check out my other settings and am in
> the process of doing so now. My advice is for everyone to check out
> their settings to see IF anything has been changed in any negative way.
> Why MicroSoft did this (or even IF they are aware of this, I do not
> know. But it is something to be aware of and check out for yourselves.

Is it possible that at some point you were connected to a router or other
device that didn't support 9k frames?


--


------------------------------

Message: 2
Date: Tue, 11 Jul 2017 17:54:50 -0400
From: S Klammer <sklammer at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Subject: Re: [Coco] 3D printer
Message-ID:
        <CAEBQMq1cbh0i6Z8A6hGryQSUbyLJdMKJEHgJRiHUNTN--28yZA at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Silly question... but, which Monoprice Select?  Mini, Plus, Ultimate, etc?

Shain
On Jul 11, 2017 3:55 PM, "Scott Wendt" <malfunct at msn.com> wrote:

> I've enjoyed that printer. For the price it is amazing, though it is
> decidedly entry level and hobbiest quality. Good luck :)
>
> ________________________________
> From: Coco <coco-bounces at maltedmedia.com> on behalf of Rietveld Rietveld <
> rietveldh at hotmail.com>
> Sent: Tuesday, July 11, 2017 5:59:19 AM
> To: Walter Miraglia
> Subject: Re: [Coco] 3D printer
>
> Monoprice select 3D
>
> Sent from my BlackBerry Passport Red Edition.
>   Original Message
> From: Walter Miraglia
> Sent: Tuesday, July 11, 2017 12:37 AM
> To: CoCoList for Color Computer Enthusiasts
> Reply To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] 3D printer
>
>
> Which 3D printer?
>
>
>
> > On Jul 10, 2017, at 8:58 PM, Rietveld Rietveld <rietveldh at hotmail.com>
> wrote:
> >
> > Just bought a 3D printer during Amazon's prime sale
> > Now I need to figure out what to make when it comes Thursday
> >
> > Sent from my BlackBerry Passport Red Edition.
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>


------------------------------

Message: 3
Date: Tue, 11 Jul 2017 22:13:11 +0000
From: Rietveld Rietveld <rietveldh at hotmail.com>
To: S Klammer <coco at maltedmedia.com>
Subject: Re: [Coco] 3D printer
Message-ID:
        <DM5PR14MB13060E0DD9AC5F7916320150B6AE0 at DM5PR14MB1306.
namprd14.prod.outlook.com>

Content-Type: text/plain; charset="us-ascii"

Mini

Sent from my BlackBerry Passport Red Edition.
  Original Message
From: S Klammer
Sent: Tuesday, July 11, 2017 5:55 PM
To: CoCoList for Color Computer Enthusiasts
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] 3D printer


Silly question... but, which Monoprice Select?  Mini, Plus, Ultimate, etc?

Shain
On Jul 11, 2017 3:55 PM, "Scott Wendt" <malfunct at msn.com> wrote:

> I've enjoyed that printer. For the price it is amazing, though it is
> decidedly entry level and hobbiest quality. Good luck :)
>
> ________________________________
> From: Coco <coco-bounces at maltedmedia.com> on behalf of Rietveld Rietveld <
> rietveldh at hotmail.com>
> Sent: Tuesday, July 11, 2017 5:59:19 AM
> To: Walter Miraglia
> Subject: Re: [Coco] 3D printer
>
> Monoprice select 3D
>
> Sent from my BlackBerry Passport Red Edition.
>   Original Message
> From: Walter Miraglia
> Sent: Tuesday, July 11, 2017 12:37 AM
> To: CoCoList for Color Computer Enthusiasts
> Reply To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] 3D printer
>
>
> Which 3D printer?
>
>
>
> > On Jul 10, 2017, at 8:58 PM, Rietveld Rietveld <rietveldh at hotmail.com>
> wrote:
> >
> > Just bought a 3D printer during Amazon's prime sale
> > Now I need to figure out what to make when it comes Thursday
> >
> > Sent from my BlackBerry Passport Red Edition.
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


------------------------------

Message: 4
Date: Tue, 11 Jul 2017 17:30:18 -0500
From: James Jones <jejones3141 at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Subject: Re: [Coco] A WARNING about Windows 10 Updates...
Message-ID:
        <CAFY=aDammnj2R=ygsTo7T36nbzaRRN_p5YqHZ8MfwsXDDwN3+A at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

This isn't about updates, at least not recent ones... but it turns out that
somewhere between Windows 7 and Windows 10, there was a change that forces
all exiting threads to acquire a lock that only one thread can have at a
time, making it a bottleneck for Windows performance. More info here:
https://randomascii.wordpress.com/2017/07/09/24-core-cpu-
and-i-cant-move-my-mouse/

On Tue, Jul 11, 2017 at 4:10 PM, Steven Hirsch <snhirsch at gmail.com> wrote:

> On Tue, 11 Jul 2017, Joe Schutts via Coco wrote:
>
> I've been a faithful Windows user since Windows 3.0 and before that DOS
>> 3.0. I just discovered a FLAW or BUG in their UPDATE Process and I wanted
>> to warn EVERY Windows 10 User out there about it before it ruins their
day.
>> If you're like me I tweak EVERY setting for optimum setting (making
>> everything run faster), the only thing I DO NOT tweak is the Clock Speeds
>> of my CPU, I just buy the fastest CPU out there available. Recently I had
>> an update preformed and I noticed that my Ethernet Adapter seemed to be
>> running much slower than normal. I then went into the Device Manager and
>> checked out the settings. I found out the the JUMBO FRAMES on all my
>> Ethernet Adapters had all been changed from 9KB MTU to a new setting of
>> DISABLED (and therefore slowing down all my Ethernet Adapters). I have
yet
>> to check out my other settings and am in the process of doing so now. My
>> advice is for everyone to check out their settings to see IF anything has
>> been changed in any negative way. Why MicroSoft did this (or even IF they
>> are aware of this, I do not know. But it is something to be aware of and
>> check out for yourselves.
>>
>
> Is it possible that at some point you were connected to a router or other
> device that didn't support 9k frames?
>
>
> --
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>


------------------------------

Message: 5
Date: Tue, 11 Jul 2017 22:24:05 +0000
From: Mark Ormond <markormond at mtxsystems.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Subject: Re: [Coco] 3D printer
Message-ID:
        <BLUPR0601MB163664A8B2CF2FB484AA36C7A2AE0 at BLUPR0601MB1636.
namprd06.prod.outlook.com>

Content-Type: text/plain; charset="utf-8"

https://www.thingiverse.com/thing:1492619


CoCo SDC Cartridge Case
by zoharel, published Apr 15, 2016


I love this case for my sdc.




-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Rietveld
Rietveld
Sent: Monday, July 10, 2017 11:58 PM
To: Coco mailing list <coco at maltedmedia.com>
Subject: [Coco] 3D printer

Just bought a 3D printer during Amazon's prime sale Now I need to figure
out what to make when it comes Thursday

Sent from my BlackBerry Passport Red Edition.

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

------------------------------

Message: 6
Date: Tue, 11 Jul 2017 22:55:12 +0000
From: Rietveld Rietveld <rietveldh at hotmail.com>
To: Mark Ormond <coco at maltedmedia.com>
Subject: Re: [Coco] 3D printer
Message-ID:
        <DM5PR14MB13067F9995BD655EAC1FF8A3B6AE0 at DM5PR14MB1306.
namprd14.prod.outlook.com>

Content-Type: text/plain; charset="us-ascii"

I am using john Strongs white and black cases with my SDC's. I don't think
I could make anything better than what he is already offering

Sent from my BlackBerry Passport Red Edition.
  Original Message
From: Mark Ormond
Sent: Tuesday, July 11, 2017 6:42 PM
To: CoCoList for Color Computer Enthusiasts
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] 3D printer


https://www.thingiverse.com/thing:1492619


CoCo SDC Cartridge Case
by zoharel, published Apr 15, 2016


I love this case for my sdc.




-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Rietveld
Rietveld
Sent: Monday, July 10, 2017 11:58 PM
To: Coco mailing list <coco at maltedmedia.com>
Subject: [Coco] 3D printer

Just bought a 3D printer during Amazon's prime sale Now I need to figure
out what to make when it comes Thursday

Sent from my BlackBerry Passport Red Edition.

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


------------------------------

Message: 7
Date: Tue, 11 Jul 2017 22:53:35 +0000
From: Rietveld Rietveld <rietveldh at hotmail.com>
To: Coco mailing list <coco at maltedmedia.com>
Subject: [Coco] Coco flash and SS/C.
Message-ID:
        <DM5PR14MB1306A9E34B962A5ACEFC489EB6AE0 at DM5PR14MB1306.
namprd14.prod.outlook.com>

Content-Type: text/plain; charset="utf-8"

If anyone else is using the cocoflash and RS speech sound pak together I
finally made time and finished my hack of the menu program. It speaks the
name of the program you are loading. (as well as all the other changes)
It is a bit tedious to initially setup because of the SS/C's phonics but
after it is flashed to the pak it is  a nice addition to the menu
If anyone is interested I can send you a copy of the hack


Sent from my BlackBerry Passport Red Edition.

------------------------------

Message: 8
Date: Tue, 11 Jul 2017 19:47:26 -0400
From: Michael Brant <brant.michael.l at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Subject: Re: [Coco] Coco flash and SS/C.
Message-ID:
        <CAGJGKwgueML6Z31m_pzDXw_=E1MUjUWAeY_sDEZEb0yKn01r6g at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

wow. now that is awesome.

On Tue, Jul 11, 2017 at 6:53 PM, Rietveld Rietveld <rietveldh at hotmail.com>
wrote:

> If anyone else is using the cocoflash and RS speech sound pak together I
> finally made time and finished my hack of the menu program. It speaks the
> name of the program you are loading. (as well as all the other changes)
> It is a bit tedious to initially setup because of the SS/C's phonics but
> after it is flashed to the pak it is  a nice addition to the menu
> If anyone is interested I can send you a copy of the hack
>
>
> Sent from my BlackBerry Passport Red Edition.
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>


------------------------------

Message: 9
Date: Tue, 11 Jul 2017 20:01:17 -0400
From: S Klammer <sklammer at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Subject: Re: [Coco] 3D printer
Message-ID:
        <CAEBQMq37OuUsyurGDRn6VjcHAV6wG73WLd9NS+OSBZnXTLPKYg at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Since you have a Mini, you make like this group...
https://www.facebook.com/groups/1717306548519045/

PS.  We should meet up one of these days :)

Shain
On Jul 11, 2017 6:55 PM, "Rietveld Rietveld" <rietveldh at hotmail.com> wrote:

> I am using john Strongs white and black cases with my SDC's. I don't think
> I could make anything better than what he is already offering
>
> Sent from my BlackBerry Passport Red Edition.
>   Original Message
> From: Mark Ormond
> Sent: Tuesday, July 11, 2017 6:42 PM
> To: CoCoList for Color Computer Enthusiasts
> Reply To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] 3D printer
>
>
> https://www.thingiverse.com/thing:1492619
>
>
> CoCo SDC Cartridge Case
> by zoharel, published Apr 15, 2016
>
>
> I love this case for my sdc.
>
>
>
>
> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Rietveld
> Rietveld
> Sent: Monday, July 10, 2017 11:58 PM
> To: Coco mailing list <coco at maltedmedia.com>
> Subject: [Coco] 3D printer
>
> Just bought a 3D printer during Amazon's prime sale Now I need to figure
> out what to make when it comes Thursday
>
> Sent from my BlackBerry Passport Red Edition.
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>


------------------------------

Message: 10
Date: Wed, 12 Jul 2017 00:08:24 +0000
From: Rietveld Rietveld <rietveldh at hotmail.com>
To: S Klammer <coco at maltedmedia.com>
Subject: Re: [Coco] 3D printer
Message-ID:
        <DM5PR14MB1306175DFDC42DDC76018F8AB6AF0 at DM5PR14MB1306.
namprd14.prod.outlook.com>

Content-Type: text/plain; charset="us-ascii"

I will check out the FB group. Thanks
And yes I should definitely make time since mississauga is only a stones
throw away from me

Sent from my BlackBerry Passport Red Edition.
  Original Message
From: S Klammer
Sent: Tuesday, July 11, 2017 8:01 PM
To: CoCoList for Color Computer Enthusiasts
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] 3D printer


Since you have a Mini, you make like this group...
https://www.facebook.com/groups/1717306548519045/

PS.  We should meet up one of these days :)

Shain
On Jul 11, 2017 6:55 PM, "Rietveld Rietveld" <rietveldh at hotmail.com> wrote:

> I am using john Strongs white and black cases with my SDC's. I don't think
> I could make anything better than what he is already offering
>
> Sent from my BlackBerry Passport Red Edition.
>   Original Message
> From: Mark Ormond
> Sent: Tuesday, July 11, 2017 6:42 PM
> To: CoCoList for Color Computer Enthusiasts
> Reply To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] 3D printer
>
>
> https://www.thingiverse.com/thing:1492619
>
>
> CoCo SDC Cartridge Case
> by zoharel, published Apr 15, 2016
>
>
> I love this case for my sdc.
>
>
>
>
> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Rietveld
> Rietveld
> Sent: Monday, July 10, 2017 11:58 PM
> To: Coco mailing list <coco at maltedmedia.com>
> Subject: [Coco] 3D printer
>
> Just bought a 3D printer during Amazon's prime sale Now I need to figure
> out what to make when it comes Thursday
>
> Sent from my BlackBerry Passport Red Edition.
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


------------------------------

Subject: Digest Footer

_______________________________________________
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


------------------------------

End of Coco Digest, Vol 178, Issue 17
*************************************


More information about the Coco mailing list