[Coco] Success! Re: Trying to build new images

[Bill Gunshannon]

On 1/8/17 5:13 PM, Robert Gault wrote:
> OK. I believe I know what is wrong and will test it.
>
> If you look at the NitrOS-9 Level1 coco1 port.mak file, you will see
> that the boot module should be a DW_BAUD38400 = 1 type. However, if you
> look at the mb.dw script on the Level1 coco1 dw.dsk you will see
> ../MODULES/BOOTTRACK/boot_dw
> That doesn't seem to be the correct Boot module. I believe it should be
> ../MODULES/BOOTTRACK/boot_dw_38400
>
> You should be able to change that yourself using the Edit command.
> EDIT MB.DW
> Keep hitting ENTER until you reach the line containing the above and then
> C /boot_dw/boot_dw_38400/
> Q
> The _ is made with CLEAR- . Press CLEAR and minus at the same time.
>
> Note that you will still see a 216 error as del bttemp is precautionary
> in case there is a bttemp present.
>
> ==============
> I just made the above change and my Coco1 will boot into NitrOS-9 via
> Drivewire.
>
Except that I have a COCO2 and that would be 57600 and there is no
module for 57600.

bill