[Coco] Moving 6809 to socket

[S Klammer]

What are people's thoughts on using a ZIF socket?  Although the same, would
allow swapping 6809 and 6309, etc.

Shain
On Jan 5, 2017 3:32 PM, "Dave Philipsen" <dave at davebiz.com> wrote:

> I agree.  Your going to spend probably a half-hour doing the conversion so
> why skimp on the socket?  The machined pin socket is generally more
> reliable.
>
> Dave
>
>
> On 1/5/2017 1:42 PM, John Mautz wrote:
>
>> I like machine tooled sockets, but they cost a little more...
>>
>> http://www.jameco.com/z/6100-40D-40-Pin-Machine-Tooled-Low-P
>> rofile-IC-Socket-0-6-Inch-Wide_41136.html
>>
>> On Thu, Jan 5, 2017 at 2:32 PM, Carlos Camacho <idevgames at gmail.com>
>> wrote:
>>
>> Looking to move a 6809 from the motherboard to a socket.
>>> Looking at Jameco, they had a few 40 pin sockets.
>>> Would this be an appropriate model?
>>> https://www.jameco.com/webapp/wcs/stores/servlet/
>>> ProductDisplay?storeId=10001&langId=-1&catalogId=10001&pa=
>>> 41111&productId=41111
>>>
>>> Cheers,
>>>
>>> --
>>> ---Carlos A. Camacho
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>
>>>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>