[Coco] This may be of interest to FPGA devs, ZX-UNO

[didier derny]

for a similar price I would rather be tempted by this board:
http://store.digilentinc.com/arty-board-artix-7-fpga-development-board-for-makers-and-hobbyists/
include a chip locked license...

--
didier

On 26/03/2016 21:28, Mark McDougall wrote:
> Actually for $100 I don't consider it particularly good value.
>
> Sent with AquaMail for Android
> http://www.aqua-mail.com
>
>
> On 27 March 2016 3:09:21 am Bill Nobel <b_nobel at hotmail.com> wrote:
>
>> That would be easy to have a Coco3 on this board.  The code is 
>> already available from a few different sources (Gary, Roger, Neil 
>> etc…)  It would be nicer if it had more sram though.
>>
>> Bill Nobel
>>
>>> On Mar 26, 2016, at 7:08 AM, Francis Swygert <farna at att.net> wrote:
>>>
>>> Date: Fri, 25 Mar 2016 14:13:50 -0400
>>> From: S Klammer <sklammer at gmail.com>
>>>
>>> http://www.verkami.com/projects/14074-zx-uno
>>>
>>> A SBC, RPi sized ZX Spectrum (and others) FPGA project...
>>> ==========================
>>> With 512K static RAM on board it might be capable of having a CoCo3 
>>> core put on it. The expansion interface might take more memory... 
>>> that would be really nice!  Price was only $86 (rounded up) for the 
>>> funding project (77 euros). I could see paying $100 for one, 
>>> assuming it had a CoCo3 core. Could replace the CoCo3 MB with it, 
>>> and a modified small USB keyboard, or someone could whip up a CoCo3 
>>> to USB keyboard interface with a micro controller for a more 
>>> transparent look.
>>>  Frank Swygert
>>> Fix-It-Frank Handyman Service
>>> 803-604-6548
>>>
>>> -- 
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>
>>
>> -- 
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>
>
>