[Coco] Formatting L.R. Tech Hard Drive in OS9 Level II

[Barry Nelson]

Well, I can tell you it looks like the device descriptors s0, s1, and dd all look like they built correctly as I examined them with dump and ran dmode on them, and if disk 1 boots, which it did for me, then the rest of the system probably built correctly, so chances are that the ktlr driver built correctly as well. Congratulations! Now I hope your hard drive works and you can get it configured. By the way, I think the correct values for sct and t0s are 22 (22 hex=34 decimal=17*2 sectors per track), since your controller is setup for 256 byte sectors. Make sure you run dmode on s0 before you try to format.

> Mark J. Blair nf6x at nf6x.net 
> Mon Jan 11 10:53:39 EST 2016
> 
> > On Jan 11, 2016, at 01:17, Barry Nelson <barry.nelson at amobiledevice.com> wrote:
> > 
> > Please email me a copy of the disk with the llkttlr drivers and descriptors or post it to the web somewhere, I would like to have on hand and also compare it to what I built.
> 
> https://dl.dropboxusercontent.com/u/29876211/nitros9/nos96809l2v030300coco3llktlr_40d_1.dsk
> https://dl.dropboxusercontent.com/u/29876211/nitros9/nos96809l2v030300coco3llktlr_40d_2.dsk
> 
> I have not verified that the llktlr driver actually works as I built it.
> 
> -- 
> Mark J. Blair, NF6X <nf6x at nf6x.net>
> http://www.nf6x.net/