[Coco] DE1-CocCo3FPGA-Keyboard

Dave Philipsen dave at davebiz.com
Wed Aug 17 18:45:10 EDT 2016


Ah, that's it!  I forgot that for whatever reason the keyboard is 
rendered non-functional if you install an analog board without 
reprogramming the DE1 for the analog board.

Dave


On 8/17/2016 5:37 PM, Zippster wrote:
> Hi Richard,
>
> You are using the same programming the DE1 would have used without
> an analog board?  The DE1 will need to be reprogrammed with Gary’s new
> build specifically for use with the analog board if that is the case.
>
> Do you have software installed on a PC for programming the DE1?
>
> - Ed
>
>
>
>
>> On Aug 17, 2016, at 5:11 PM, Richard E. Crislip <rcrislip at neo.rr.com> wrote:
>>
>> Hi after letting it sit for close to a year, I tried to use my DE1
>> CoCo3FPGA now equipped with the analog card. I am still using the
>> original ROM imaged flashed to it by, I believe, Zippster. Switches 0,
>> 1, 2, 4, 5, 6, & 9 are turned on, the switches are moved furthest away
>> from me and the card edge. DECB pops up right away, but I cannot get
>> any response my PS2 E-Machine keyboard, except for light flash
>> immediately after power up. After that the keyboard does not work.
>>
>> -- 
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>



More information about the Coco mailing list