[Coco] NitrOS9 booting sequence

[Christopher R. Hawks]

On Tue, 01 Sep 2015 16:10:50 -0500
Dave Philipsen <dave at davebiz.com> wrote:

> Ok, so as everyone has probably figured out I am trying to make some
> modifications to the REL, Boot, and Krn modules in order to get the
> CoCo3 FPGA booting directly from the SD card without help from DW.
> I'm also trying to accomplish this with native tools under NitrOS9
> instead of using the Toolshed and Lwtools packages. So, today I was
> able to create a boottrack file and svdgen a disk.  When I try to
> boot it the screen shows all of the modules loaded through Clock2 and
> then at the end it prints  "i2xo*X" just before the boot fails.  I'm
> guessing that something is still missing on the boot disk.  I have an
> OS9Boot file, a sysgo file, and a CMDS directory with just "shell" in
> it.  What am I missing in order to complete the boot?
> 
> Dave Philipsen
> 
> 
> 

Dave:

	If you haven't seen it, attached is my decription of the boot
process printing (with msdos eols). It describes what the system prints
on the screen as it boots. The * indicates failure and the X indicates
Pathname Not Found error. 'X' is ASCII 88, and 88 + 128 = 216, the
error code for 'Path Name Not Found'.


Christopher R. Hawks
HAWKSoft
-- 
Living your life is so difficult, it has never been attempted before.
----------------------------------------
       \   ^__^                         
        \  (oo)\_______                 
           (__)\       )\/\           
               ||----w |                
               ||     ||                
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: boot.dos.txt
URL: <https://pairlist5.pair.net/pipermail/coco/attachments/20150901/98830818/attachment.txt>