[Coco] Request for someone to draw up a schematic for the CoCo3to the Sony KV1311CR monitor

[Zippster]

Stephen,

Send me a description, I’ll draw it up for you.

- Ed

> On Nov 5, 2015, at 1:53 PM, Stephen H. Fischer <SFischer1 at Mindspring.com> wrote:
> 
> I have no experience with any of the software that can do the job, and do not wish to spend time that would take me days and someone who is doing this every day 10 minutes after data is collected and understood. 
> 
> I have mine built and in use for decades. There are lots of words in the subject online and in posts I have made for years. Just no schematic.
> 
> That's why I asked for someone to do the job. I have told the person on Facebook twice now and a wiring diagram was even asked for by Kip.
> 
> SHF
> 
> 
> ----- Original Message ----- 
> From: "Chris Osborn" <fozztexx at fozztexx.com>
> To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
> Sent: Thursday, November 05, 2015 11:24 AM
> Subject: Re: [Coco] Request for someone to draw up a schematic for the CoCo3to the Sony KV1311CR monitor
> 
> 
>> 
>> On Nov 5, 2015, at 11:12 AM, Stephen H. Fischer <SFischer1 at Mindspring.com> wrote:
>> 
>>> I have it designed in my head but I do not have the software.
>> 
>> KiCAD is free:
>> 
>> http://kicad-pcb.org/download/
>> 
>> It's no more difficult to use than Eagle and doesn't have any restrictions on size.
>> 
>> --
>> Follow me on twitter: @FozzTexx
>> Check out my blog: http://insentricity.com
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco