[Coco] disk image software question

[Bill Pierce]

David, I was under the assumption (I may be wrong) that you can use both scsi and ide with the SuperDriver. You need:
rbsuper.dr
lltc3.dr
llide.dr
i0-i2.dd
s0-s6.dd
>From what I was told, both sub-modules can exist ing the same boot as long as you have both controoler and they're mapped to different i/o addresses. Again, I may be wrong. I do use the ide driver for the Glenside ide and it works great. I can access drivewire and the ide plus any floopy drives I may have connected.

 

 


Bill Pierce
"Today is a good day... I woke up" - Ritchie Havens
 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com


 

 

-----Original Message-----
From: David Gettle <david17361 at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Tue, May 5, 2015 5:23 pm
Subject: Re: [Coco] disk image software question


OK here's what I'm trying to do....

I have between 20 and 25 mb of data on a
zip100 disk that I am trying to
transfer into a format that either Drivewire or
the Vcc can access the Zip
disk is in OS-9 format I am not able at this point to
connect either of the
two zip100 drives I now own to the CoCo, because
Superdriver cannot access
both IDE and SCSI devices within the same boot
session, and I cannot get
NitrOS9 to boot with drivewire and allow me to access
the Zip100 drive
without an additional SCSI hard drive in the system, the one I
had crashed.
The Zip100 disk was a backup of the drive that crashed.

On Tue,
May 5, 2015 at 4:31 PM, Aaron Wolfe <aawolfe at gmail.com> wrote:

> Drivewire
images are just raw sector data, as such they have no particular
> format.  By
default they are expanded as requested by the coco, so you can
> just create a
blank file any way you'd like, in Windows right click and
> New, Text file works
fine.  You will want to format the disk using DECB or
> OS9 depending on
intended use after inserting it.
>  On May 5, 2015 4:12 PM, "David Gettle"
<david17361 at gmail.com> wrote:
>
> > What are the recommended programs to use to
create disk images for use
> with
> > drivewire?
> >
> > --
> > Coco mailing
list
> > Coco at maltedmedia.com
> >
https://pairlist5.pair.net/mailman/listinfo/coco
> >
>
> --
> Coco mailing
list
> Coco at maltedmedia.com
>
https://pairlist5.pair.net/mailman/listinfo/coco
>

-- 
Coco mailing
list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco