[Coco] Error 251

[Bob Devries]

On 9/03/2015 1:12 PM, Kip Koon wrote:
> Hi Bob,
> I don't can't exactly duplicate your setup as I only have Coco 3s with 6809s in them and I don't have an SCII floppy controller, but I can run a CocoSDC in slot 3.  What else do you have in the MPI?

As my dear wife would say: wala
She's a Filipina.

It means: nothing.

I only have the two carts, the SCII with 4-in-1 board, and the CocoSDC.

Regards, Bob Devries
Dalby, QLD, Australia


>
> Kip Koon
> computerdoc at sc.rr.com
> http://www.cocopedia.com/wiki/index.php/Kip_Koon
>
>
> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Bob Devries
> Sent: Friday, March 06, 2015 11:00 PM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Error 251
>
> Hi Kip,
>
> I have a Coco3/6309 with 1MB ram. I have a modified MPI, with an SCII floppy controller in slot 4, and my CocoSDC in slot 3.
>
> On the CocoSDC, I have two files for my NitrOS9 setup. The file for /sd0 is "partitioned". Part 1, /DD is 18432 sectors, and part 2, /sda is
> 503808 sectors. That file is mounted on drive 0. Drive 1 has one file of
> 477530 sectors. I also use drivewire.
>
> Regards, Bob Devries
> Dalby, QLD, Australia
>
>
> On 7/03/2015 12:08 PM, Kip Koon wrote:
>> Hi Bob,
>> I have not gotten any error 251s on my system.  Exactly what is your setup and what were you doing so I can try to reproduce your situation.  Other than the dcheck below, are there any other situations that produce error 251?
>>
>> Kip Koon
>> computerdoc at sc.rr.com
>> http://www.cocopedia.com/wiki/index.php/Kip_Koon
>>
>>
>>