[Coco] Error 251
Tim Fadden
t.fadden at cox.net
Sun Mar 8 12:14:26 EDT 2015
Same here Bob, I always piped the command to a shell also. Used this
method to make backups for years using two hard drives attached to my
Disto 4 in 1 board. And then when Drive Wire came out, I used that
successfully. Some where along the upgrade/tweaking of Nitros9 it
started going haywire. I spose it could be hardware, but that is beyond
me to figure out. Think I will make a stock os9 image with the drive
wire and super drivers and see where that gets me.
Oh well, back to playing LOTRO on my Win7 box.
On 3/7/2015 8:39 PM, Bob Devries wrote:
> I always use:
>
> dsave /x0 ! shell
>
> That usually works for me, although I have noticed recently that the
> first character of the commands seem to be getting missed, which makes
> the command fail.
>
> I don't know what's causing that.
>
> Regards, Bob Devries
> Dalby, QLD, Australia
>
>
> On 8/03/2015 9:21 AM, Stephen H. Fischer wrote:
>> Hi,
>>
>> Do your DSAVE to a file on another disk.
>>
>> OS-9:DSAVE /X0 >/D2/DSAVE.saved
>>
>> Then you can look at it with an editor, I use Colorful Sled or move
>> it to Windows with EmuDisk or CoCoDskUtil or ...
>>
>> I suspect you may have a file length too big or a line length to too
>> big.
>>
>> If the text file shows no problem you can edit the "dsave.saved" into
>> smaller files.
>>
>> My normal mode of using DSAVE is:
>>
>> OS-9:DSAVE /X0 ! tee dsave.saved
>>
>> Ann then after perhaps some editing:
>>
>> OS-9; <dsave.saved
>>
>> Or just tell DSAVE to just do parts of the disk.
>>
>> (The X0 is just for this post, you need to put the actual disk in
>> there.)
>>
>> SHF
>>
>
--
Tim Fadden
More information about the Coco
mailing list