[Coco] Source for CoCo 3 Rubber Feet

[Raymond Jett]

I have a small number (about a dozen) of the round plastic feet that have the push pin in the middle to hold them in place. 

They were a perfect fit on my CoCo 3 which had the little holes in the bottom for the pin to fit in.

Raymond

Date: Sun, 26 Jul 2015 20:53:57 -0700
From: Steve Batson <steve_batson at yahoo.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Subject: Re: [Coco] Source for CoCo 3 Rubber Feet
Message-ID: <64D6CC9A-0824-4001-8F3A-24EAAA0A0C86 at yahoo.com>
Content-Type: text/plain; charset=us-ascii


I found some very much like what is on the CoCo at a Local Ace Hardware Store. They were white instead of Black, but very close in size and shape. They work great. It was a pack of at least 8, I don't recall.



On Jul 26, 2015, at 7:10 PM, Richard Goedeken <Richard at fascinationsoftware.com> wrote:

> I was recently looking for the same thing, and I ended up buying these:
> 
> http://www.ebay.com/itm/281033730630
> 
> They aren't exactly the same.  They are not as 'slippery' as the original Coco
> feet (the flat ones, not the rubber hemisphere ones) and they are not quite as
> tall either, but they at least keep the bottom of the case off of the table.
> 
> Ricahrd
> 
> On 07/25/2015 12:25 AM, K. Pruitt wrote:
>> Has anybody found a source for a good match for the rubber feet on a CoCo 3?
>> 
>> I'd like to use it with an MPI, so a good match is important.
>> 
>> So many CoCo's seem to be footless that I figure someone here probably went
>> down this road already.
>> 
>> I was thinking that those long rubber feet they sell for laptops might work as
>> they come in a variety of thicknesses. But something that actually replaces
>> the stock feet on a CoCo 3 would certainly be better. That is if they
>> available anywhere other than on the bottom of another CoCo.
>> 
>> Thanks
>> 
>> 
>> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco