[Coco] Source for CoCo 3 Rubber Feet

[K. Pruitt]

I'll do a search of their website for white ones.  Thanks, Steve.

----- Original Message ----- 
From: "Steve Batson via Coco"
Sent: Sunday, July 26, 2015 8:53 PM
Subject: Re: [Coco] Source for CoCo 3 Rubber Feet


>
> I found some very much like what is on the CoCo at a Local Ace Hardware 
> Store. They were white instead of Black, but very close in size and shape. 
> They work great. It was a pack of at least 8, I don't recall.
>
>
>
> On Jul 26, 2015, at 7:10 PM, Richard Goedeken  wrote:
>
>> I was recently looking for the same thing, and I ended up buying these:
>>
>> http://www.ebay.com/itm/281033730630
>>
>> They aren't exactly the same.  They are not as 'slippery' as the original 
>> Coco
>> feet (the flat ones, not the rubber hemisphere ones) and they are not 
>> quite as
>> tall either, but they at least keep the bottom of the case off of the 
>> table.
>>
>> Ricahrd
>>
>> On 07/25/2015 12:25 AM, K. Pruitt wrote:
>>> Has anybody found a source for a good match for the rubber feet on a 
>>> CoCo 3?
>>>
>>> I'd like to use it with an MPI, so a good match is important.
>>>
>>> So many CoCo's seem to be footless that I figure someone here probably 
>>> went
>>> down this road already.
>>>
>>> I was thinking that those long rubber feet they sell for laptops might 
>>> work as
>>> they come in a variety of thicknesses. But something that actually 
>>> replaces
>>> the stock feet on a CoCo 3 would certainly be better. That is if they
>>> available anywhere other than on the bottom of another CoCo.
>>>
>>> Thanks
>>>
>>>
>>>
>>
>> --