[Coco] Another problem

[Michael Graham]

Sounds like a head alignment problem, to me.

--Michael

On 7/16/2015 1:55 PM, Bill wrote:
> Naturally, about the only time I post is when I have a problem. So, here
> goes:
>
>   
>
> I have 2 Coco 3 systems. One consists of a Coco 3, MPI and a dual set of 3
> ½” 80 track drives (set 1). I’m running an FD 500 (unaltered) disk
> controller with it.
>
>   
>
> The other is a Coco 3 with a dual set of 3 ½” 80 track drives. I’m running a
> 26-3029 (unaltered) controller (set 2). Individually, they work fine. When I
> change the drives from one computer to the other, they still work fine.
>
>   
>
> The problem is that the disks created from Set 1 cannot be read by Set 2.
> Regardless which computer they are hooked to, one set of drives cannot read
> the disks created by the other set of drives.
>
>   
>
> Ideas? Solutions?
>
>   
>
> Thanks
>
>   
>
>