[Coco] LWTools & Nitros9 Build
Bill Nobel
b_nobel at hotmail.com
Mon Jan 19 21:31:47 EST 2015
Hmm, It just crapped out at level 2 krn with D.CCSkk redefinition
Bill Nobel
> On Jan 19, 2015, at 8:12 PM, Bill Nobel <b_nobel at hotmail.com> wrote:
>
> I expect it to be inspected to the nines (canadian slang) It is still going on Level 1 Dragon right now. I expect this to go all night, since I am doing this on a Raspberry Pi. Still haven’t gotten a stable Linux on a laptop. Oh, it just kicked into Level 2.
>
> Bill Nobel
>
>> On Jan 19, 2015, at 7:54 PM, Bill Pierce via Coco <coco at maltedmedia.com> wrote:
>>
>>
>> Bill let me know when you have it ready to test and I'll gladly run it through the gauntlet :-)
>>
>>
>> Bill Pierce
>> "Today is a good day... I woke up" - Ritchie Havens
>>
>>
>> My Music from the Tandy/Radio Shack Color Computer 2 & 3
>> https://sites.google.com/site/dabarnstudio/
>> Co-Contributor, Co-Editor for CocoPedia
>> http://www.cocopedia.com/wiki/index.php/Main_Page
>> E-Mail: ooogalapasooo at aol.com
>>
>>
>>
>>
>> -----Original Message-----
>> From: Bill Nobel <b_nobel at hotmail.com>
>> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
>> Sent: Mon, Jan 19, 2015 8:45 pm
>> Subject: Re: [Coco] LWTools & Nitros9 Build
>>
>>
>> YES, Thank you all for the pointers, I have it compiling now. We may see Level
>> 3 in the next couple of weeks in a beta test!!!!
>>
>> Bill Nobel
>>
>>> On Jan 19, 2015, at 6:56 PM, Robert Gault <robert.gault at att.net> wrote:
>>>
>>> Bill Nobel wrote:
>>>> Well I somewhat have it working, I start the build and it trucks along for a
>> bit then stops on ‘level1/coco1/cmds no rule to make target basic09’ I have 3rd
>> party stuff installed in ~/Coco3/Nitros9-v3.3.0 3rd party’ same as Nitros9?
>>>>
>>>> Bill Nobel
>>>
>>> That is typical. :) Make sure that the 3rdparty/packages/basic09 has an
>> explicit path to NITROS9DIR in its make file such as:
>>>
>>> ifndef NITROS9DIR
>>> NITROS9DIR = $(HOME)/nitros9_version_something
>>> endif
>>>
>>> or
>>>
>>> use ../../../rules.mak
>>>
>>> in the case of 3rdparty/packages/basic09 .
>>>
>>> Alternatively, you could pre-assemble 3rdparty/packages/basic09 although you
>> will still have to deal with a pathname to rules.mak. Or start your assembly in
>> the root directory of NitrOS-9.
>>>
>>> Robert
>>>
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>>
>>
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
More information about the Coco
mailing list